Johnson JCRL120P2 - Installation Accessory; Installation Location Selection; Included Installation Parts; Site Preparation Assemblies

2. INSTALLATION ACCESSORY
Select the installation location
Don’t install at the place where cover with heavy oil, vapor or
sulfureted gas, otherwise, this product would be deformed
that would lead to system malfunction.
Preparation before installation
1. Please confirm th
at all the following parts you have been supply.
2. Prepare the following assemblies on the site.
1
2
3
4
5
3
2
M4X20 (For Mounting on the Wall)
M4X25 (For Mounting on switch box)
1
2
1
6
7
8
3
2
No.
Name
Qty. Remarks
Wire controller
Installation and owner’s manual
For Mounting on the Wall
Switch box
Wiring Tube
(Insulating Sleeve and
Tightening Screw)
Qty.(embedded
into wall)
Plastic screw bars
Screws
Wall plugs
For fixing on switch box
(Optional)
No.
Name
Remarks
Specification
(only for reference)
Screws
1
1
1
Battery
The connection cable
1
1
4
V.1