Need help?Do you have a question about the Johnson JCRL120P2 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Output Voltage | 12V DC |
| Maximum Load Current | 10A |
| Enclosure Type | Plastic |
| Dimensions | 120 mm x 80 mm x 40 mm |
| Weight | 500g |
Explains the meaning of WARNING and CAUTION symbols for safety.
Emphasizes entrusting installation to professionals to prevent hazards.
Provides specific notes on avoiding flammable gases, wet hands, and correct wiring.
Advises against installing in locations with heavy oil, vapor, or sulfurous gas.
Lists required parts for installation, including the wire controller and manual.
Details assemblies that need to be prepared on-site, such as switch boxes and wiring tubes.
Displays controller dimensions and illustrates wiring connections to the indoor unit.
Details the wiring assembly process and connection steps for the controller.
Covers removing the controller top, mounting the back plate on walls or switch boxes.
Guides battery installation and presents methods for wiring the indoor unit.
Covers final steps like wire sealing, preventing water entry, and reattaching the controller top.
Details opening the front panel and disconnecting the wire from the main controller board.
Guides identifying controller components and display board connections (CN201, CN101).
Covers uninstalling the display board and preparing it for replacement.
Explains connecting wires to the adaptor board and mounting components to the front panel.
Lists input voltage, ambient temperature range, and ambient humidity range.
Provides details on wiring type, size, and maximum total length.
Lists key features such as mode selection, fan speed, swing, timers, and lock functions.
Explains the meaning of various indicators and icons shown on the wired controller display.
Identifies and explains the function of each button on the wired controller.
Guides on setting the current day and time using the TIMER, +, and - buttons.
Covers starting/stopping the unit and selecting the operation mode.
Explains setting fan speed and selecting the room temperature sensor location.
Details child lock, keypad tone, and temperature scale (°C/°F) selection.
Explains Turbo/Auxiliary Heat and Lift Panel functions.
Describes operating Up-Down and Left-Right swing functions.
Details adjusting Up-Down airflow direction and controlling individual louvers.
Introduces Weekly, On, Off, and On/Off timer functions.
Guides on setting a single On or Off timer event.
Details the steps for setting both an On timer and an Off timer.
Initiates weekly timer setup, including day selection and setting ON timer parameters.
Sets time, operation mode, and room temperature for weekly timer events.
Configures fan speed, sets multiple events, and adds additional days to the weekly timer.
Explains starting/canceling the weekly timer and setting "Day Off" for holidays.
Covers copying daily settings and creating/managing "Day Off" entries.
Details confirming settings, selecting days to copy to, and reverting to the weekly timer.
Explains how to delete a specific time scale entry from the weekly timer.
Guides on using automatic airflow adjustment for external static pressure.
Explains how to set the airflow rate using controller buttons.
Outlines procedures for investigating system malfunctions based on error codes.
Lists common malfunctions like communication errors (F0) and abnormal panels (F1).
States that EMC and EMI comply with CE certification requirements.
To Next Page