Download this manual at
www.johnsonlevel.com/manuals
Laser
Class II, <1mW, 650nm
Accuracy
+/-
5
/
64
”
Range
2” to 85’
Modes
Length, Area, Volume &
Continuous
Units
m, ft, in,
1
/
8
”,
1
/
16
”,
1
/
32
”
Operating Temp
23°F to 104°F
Storage Temp
-4°F to 160°F
Batteries
2xAAA
Battery Life
up to 10,000 measures
Dimensions
3.9” x 1.4” x 0.9”
Weight
2
5
/
8
oz. (w/ batteries)
IP Rating
IP54 (rainproof)
• Tool does not power on or remain on -
Replace batteries. Check battery polarity.
• Measurement is incorrect by about 4 inches -
Check your measurement reference and adjust
accordingly. See “GETTING STARTED”.
• The tool shows “Err” and a number - Error
codes are diagnosed as follows:
• Err01: Tool’s operating range is exceeded
• Err02: Weak return laser signal
• Err03: Value exceeds what LCD can display
• Err04: Low battery
• Err05: Tool is outside temperature range
• Err06: Ambient light is too high to operate
Err02 indicates the tool can’t receive the laser
signal. Ensure the receiving window is clean.
Ensure the target is non-porous. Porous surfaces
include cinder blocks, carpet, foam, etc. A
reflective target or white sheet can be used over
porous surfaces to take measurements.
SPECIFICATIONS
TROUBLESHOOTING
Johnson Level & Tool oers a two-year limited
warranty on this product. You can obtain a copy of
this warranty on our website or by contacting our
customer service department. The limited warranty
contains various limitations and exclusions.
Do not return this product to the place of
purchase. Non-warranty repairs and calibration
must be done by an authorized Johnson service
center or the warranty will be void. A service center
list can be found on our website.
Contact us for an RMA number before sending any
product in for service. Proof of purchase is required
for warranty service.
Note: The user is responsible for the proper use
and care of the product. It is the responsibility of
the user to verify the calibration of the instrument
before each use. If you experience problems with
this product, please contact us.
In the US: 888-9-LEVELS (888-953-8357)
In Canada: 800-346-6682
On the Web: www.johnsonlevel.com
Please register your product within 30 days of
purchase. Registering ensures we have your
information on file for warranty service even if
you lose your receipt and lets us contact you if
there is ever a product recall. We will never sell
your information and will only send you marketing
information if you opt-in.
To register, scan or click:
www.johnsonlevel.com/register
• Set your operating mode by pressing
. The
LCD will indicate the current mode as follows:
PRODUCT WARRANTY
PRODUCT REGISTRATION
TAKING MEASUREMENTS
Length: Measures a single length.
Press to measure. Press to
re-enable the laser to prepare for the
next measurement.
Area: Calculates area based on two
measurements, such as for drywall,
paint or flooring estimates. Press
Volume: Calculate volume based
on three measurements, such as
for HVAC applications. Press
to
Continuous: Used for displaying the
instantaneous length. Press
to
begin taking measurements. Press
to record the first length. Press
again
to record the second length. The tool will
display the resulting area.
record each of three lengths. The tool will
display the resulting volume.
again to pause measurements and hold the
current measurement on the LCD.
Pro Tips:
• Always hold the tool steady. If possible,
position against another surface for stability.
• When in bright light such as sunlight, you
may not achieve the full 85’ range of the tool.
• In bright conditions, aim at reflective
surfaces to improve beam visibility.
• Always check your reference to avoid
erroneous measurements.
To Previous Page
Loading...
Need help?
General
