Joie Signature i-Traver - Installation using ISOFIX and 3-point belt; ISOFIX Guide Installation; ISOFIX Connector Operation

11 12
2. Press the ISOFIX adjusting
button to pull out the ISOFIX
connectors.
15
Rotate the ISOFIX connectors 180
degrees until they are pointing in
the direction of the ISOFIX guides.
16
1. Fit the ISOFIX guides with the
ISOFIX anchor points.
14
The
ISOFIX guides can protect the
surface of the vehicle seat from
being torn. They can also guide
the ISOFIX connectors.
14
15
16
1
1
2
2
Installation using ISOFIX
System and 3-point belt or
using 3-point belt only
(Forward Facing Mode/ for Child between 100cm-
150cm / 3.5–12 years old)
see images
14
-
26
If vehicle is equipped with ISOFIX, the vehicle lower anchor
points may be visible at the vehicle seat crease. See your
vehicle owner’s manual for exact locations, anchor
identification, and requirements for use.