EasyManuals Logo

Joie Signature i-Traver User Manual

Joie Signature i-Traver
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
15 16
! Make sure, that the shoulder
belt portion of the vehicle belt
goes straight through the
shoulder belt guide as shown
in
25
! Tighten the vehicle belt by
pulling the shoulder strap until
all belt slack is removed.
! I f the belt lays across child
neck, head or face, readjust
head support height.
! Any straps holding the booster
to the vehicle should be tight
and the straps should not be
twisted.
see images
27
-
30
Detach Soft Goods
25
26
27
28
!
Position shoulder belt through
the shoulder belt guide
shown in
22
-1
!
DO NOT position vehicle belt
over top of the armrests. It
must pass underneath the
armrests.
22
-2
!
The booster can not be used if
the vehicle safety belt buckle
(female buckle end) is too long
to anchor the booster securely.
22
-4
!
After your child is placed in this
booster, the safety belt must
be used correctly, and ensure
that any lap strap is worn low
down, so that the pelvis is
firmly engaged.
22
!
To ensure the correct head
support height is obtained, the
bottom of the headrest MUST
be even with the top of child’s
shoulders as shown in
23
and
the shoulder belt must be
positioned in the green zone as
shown in
24
! Place a booster firmly against
the back of a forward-facing
vehicle seat equipped with a
lap/shoulder belt.
23
24

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Joie Signature i-Traver and is the answer not in the manual?

Joie Signature i-Traver Specifications

General IconGeneral
BrandJoie
ModelSignature i-Traver
CategoryCar Seat
LanguageEnglish

Related product manuals