Need help?Do you have a question about the Jolly LX-740 and is the answer not in the manual?
General| Brand | Jolly |
|---|---|
| Model | LX-740 |
| Category | Flood Light |
| Language | English |
Lists included components like signal cable, user manual, power cable, safety cable, omega holder, and service card.
Step-by-step instructions for safely removing the fixture from its case and returning it for storage.
Emphasizes user qualifications, following manual instructions, and a critical warning about high voltage electrical shock.
Instructions on safe handling of power cords, connections, voltage verification, and proper grounding.
Warns against direct light exposure, notes optical radiation, and covers light collimation system advice.
Specifies operating limits (distance, temps) and IP rating, indicating indoor use and no water protection.
Lists compliance with European Directives (LVD, EMC, RoHS, ErP) and emphasizes essential earthing for shock protection.
Provides guidance for environmentally sound disposal of the product (WEEE) and its battery according to local regulations.
Covers indoor use, handling after temperature fluctuations, and avoiding device shaking or brute force.
Details safe handling, installation spot selection, securing with safety ropes, and checking housing closure.
Warns against igniting the lamp with open covers due to potential explosion risk and emission of UV radiation.
Stresses operation by qualified personnel, prohibits unauthorized modifications, and warns about safety risks.
Information on various mounting positions, use of special connectors, and clamp installation requirements.
Emphasizes secondary safety attachments and prohibits access below the installation area during servicing.
Requires expert approval for installations and periodic inspections every four years and annually.
Specifies installation away from people, outdoor area requirements, and expertise needed for overhead rigging.
Warns about severe injuries from falling projectors and stresses checking the installation area's load capacity.
Details on installing safety ropes for overhead use, specifying type and attachment points for secure rigging.
Identifies mounting plate, secure chain, and omega holder, with a warning about ensuring installation location suitability.
Warnings about disconnecting power, hot housing, high voltage, moisture, grounding, and temperature limits.
Provides standard wiring for power cables (EU/US) including Live, Neutral, and Earth connections.
Specifies the use of stereo shielded cables and 3-pin XLR plugs/connectors for DMX connections.
Explains the need for DMX cable termination with a 120-ohm resistor at the last fixture to prevent signal corruption.
Details the pin assignments for 3-pin and 5-pin XLR connectors used in DMX communication for clarity.
Illustrates a DMX terminator setup using an XLR plug and a 120-ohm resistor to prevent signal corruption.
Identifies the main physical components of the fixture: Head, Arm, and Base for easy reference.
Lists and describes the connectors (XLR) and control interface elements (display, buttons) on the fixture.
Provides the physical dimensions of the fixture in millimeters, shown in various orthographic views for clarity.
Explains how to navigate the menu using buttons or touch screen to set address and function codes.
Describes the initial display, software version display, DMX address modification, and error indicators.
Lists common error codes, their meanings, and recommended checks or measurements for troubleshooting issues.
Defines different DMX modes and their corresponding value ranges for controlling specific fixture functions.
Provides instructions for safe cleaning, emphasizing disconnection from power and using appropriate cleaning materials.
Details specific cleaning tasks for the objective lens, cooling fans, gobos, and interior of the fixture.
Explains how to safely replace the fuse, stressing the use of identical type and rating after unplugging.
Lists electrical specifications including source (RGBW LED), power rating, voltage, and color temperature.
Provides net weight and dimensions, as well as carton package dimensions and weight for logistics.
Outlines DMX channel models, scan ranges, dimmer type, zoom type, shutter, and control modes.
Illustrates the overall electronic architecture and connections between main boards like LED Control, Motor Control, and Display.
Details the power supply connections and the motor driver boards for LED and zoom functions within the fixture.
Describes the LED control, display, and communication bus boards responsible for fixture operation and control.
Provides contact information including telephone, fax, email, and website for the manufacturer, Guangzhou hongcai stage equipment Co.,Ltd.
Lists the physical address of Guangzhou hongcai stage equipment Co.,Ltd for correspondence and location.
To Next Page