Jolly LX-740 - Device Description and Interface; DMX Terminator Diagram Explained; Fixture Main Components Identification; Interface Connectors and Control Buttons

5.Description of the device
DMX Terminator Diagram
-For installations where the DMX cable has to run a long distance or
is In an electrically noisy environment it is recommended to use a
DMX terminator. This help in preventing corruption of the signal by
electrical noise. The DMX terminato r is simply an XLR plug witha
120 resistor connected between pins 2 and pins3, which is then
plugged into a the output XLR socket of the last ifxture in the chain.
Ω
1
2
3
120Ω
PIN2
PIN3
- 7 -
Head
Tilt °, 228 Fixture could auto
reset.
3.
Arm
Pan °,450 Fixture could auto
reset.
Base
2.
1.
4.5-pin XLR female
5.5-pin XLR male
6. display
7.power in
8.power out
9.MODE button
10.UP button
11.DOWN button
12.ENTER button
European standard edition
4
5 6
7
8
9
10
11
12