- 12 -
8.DMX protocol
8.1 Unit model
Mode1 Mode2 Dmx Value Function Fade Type
1 1 Pan Pan movement by 450° 0-255
2 2 Pan Fine Fine control of pan movement 0-255
3 3 Tilt Tilt movement by 228° 0-255
4 4 Tilt fine Fine control of tilt movement 0-255
Standard mode 0
Max. Speed Mode 1
Speed from max. to min 2-255
Time from 0.2 sec. to 25.5 sec 2-255
Reserved 0-19
Display ON 20-24
Display OFF 25-29
RGBW colour mixing mode 30-34
CMY colour mixing mode 35-39
Pan/Tilt speed mode 40-44
Pan/Tilt time mode 45-49
Blackout while pan/tilt moving 50-54
Disabled blackout while pan/tilt moving 55-59
Dimmer curve - square law 60-64
Dimmer curve - linear 65-69
Fans mode: Auto 70-74
Fans mode: High 75-79
White point 8000K ON 80-84
White point 8000K OFF 85-89
Fans mode: Quiet 90-94
Reserved 95-129
Reserved 130-139
Pan/Tilt reset 140-149
Zoom reset 150-159
Reserved 160-169
Tungsten effect simulation (750W) On 170-171
Tungsten effect simulation (1000W) On 172-173
Tungsten effect simulation (1200W) On 174-175
Tungsten effect simulation (2000W) On 176-177
Tungsten effect simulation (2500W) On 178-179
Tungsten effect simulation Off 180-181
Reserved 182-255
No function (0=default) 0
Filter 4 (Medium Bastard Amber) 1-2
Virtual colour
wheel
77
Pan/Tilt speed mode
Pan/Tilt time mode
5 5
Pan/Tilt Speed
Pan/Tilt Time
6 6
Power/Special
Functions
To activate following functions, stop in DMX value for at least 3 s
and shutter must be closed at least 3 sec.(Shutter,Strobe)
channel 20/15 must be at range: 0-31 DMX). Corresponding menu
items are temporarily overriden
To activate following functions, stop in DMX value for at least 3 seconds.
Tungsten effect simulution for whites 2700K and 3200K
To Next Page
Loading...