JONATHAN Y Evelyn JYL2030A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft
,
dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
Model# JYL2030A
Product Dimensions: 14"L X 14"W X 59.5"H
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
*
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
A.B.C.D
Part List and Hardware List
A
.
B
.
C
.
D
.E.F.G.
H
Lamp base 1X I Harp 1X
F NECK 1X K Shade 1X
G Saddle 1X L Finial 1X
H Socket 1X J Bulb 1X

JONATHAN Y Evelyn JYL2030A Specifications

General

Brand	JONATHAN Y
Model	Evelyn JYL2030A
Category	Home Lighting
Product Type	Table Lamp
Shade Material	Fabric
Bulb Included	Yes
Bulb Type	LED
Number of Lights	1
Voltage	120V
Wattage	60W
Width	14 inches
Length	14 inches
Color	White
Material	Fabric

Summary

Important Safety Warnings

Electrical Safety and Installation

Ensure electrical supply is off, and installation is done by a licensed electrician.

Product Inspection and Handling

Inspect for damage before installation; do not install if defective. Returns may not be accepted after installation.

Care and Maintenance

Cleaning Procedures

Unplug before cleaning. Use feather duster or vacuum for shades. Wipe bases with a soft, dry cloth. Avoid harsh chemicals.

Assembly and Usage Precautions

Pre-Assembly Checks and Safety Guidelines

Verify all parts, assemble on a soft surface, and follow safety instructions for fire, shock, and injury prevention.

Cord and Plug Safety

External cord is not replaceable. Damaged luminaires must be destroyed. Use polarized plug correctly.

Part List and Hardware

Product Preparation and Assembly

Pre-Assembly Checklist

Ensure all parts are present and undamaged before starting assembly. Estimated assembly time is 6 minutes.

Bulb Specifications

Use ON/OFF type 'A' bulb max 100W, CFL max 23W, or LED max 12W. A 9W LED bulb is included.

Assembly Steps

Align parts, pull cord through base, screw stem connections, and attach shade, finial, and bulb.