JONATHAN Y JYL3071A - User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL3071A
Product Dimensions: 16"Lx 9"W x 32"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X H USB 1X

Summary

Care and Maintenance

Notice & Important Safety Instructions

Part List and Hardware List

Preparation

Bulb Type Recommendation

Recommends bulb types and wattage, stating a 9-watt LED bulb is included.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document provides instructions for the assembly, use, and maintenance of a portable lamp. The lamp is designed for indoor use and features a classic design with an ornate base and a fabric shade.

Function Description

The primary function of this device is to provide illumination. It operates by screwing a compatible light bulb into the socket, which then emits light when the lamp is turned on. The lamp is designed to be placed on a level surface, such as a table or desk, to provide ambient or task lighting. It includes a polarized plug as a safety feature to reduce the risk of electric shock, ensuring that it can only be inserted into a polarized outlet in one specific orientation. The lamp is compatible with various bulb types, including incandescent, CFL, and LED, within specified wattage limits, offering flexibility in lighting preferences and energy efficiency.

Usage Features

The lamp is designed for straightforward assembly and operation. Before starting, users are instructed to ensure all parts are present and to assemble the item on a soft surface to prevent scratching the finish. The assembly process involves a few simple steps:

1. Inserting the Harp: The harp (D) is inserted into the saddle (B), which is part of the lamp base. The harp is a U-shaped wire frame that supports the lamp shade.
2. Attaching the Shade: The shade (E) is placed onto the harp (D).
3. Securing the Shade: The finial (F) is then tightened onto the harp (D) to secure the shade in place. The finial is a decorative cap that screws onto the top of the harp.
4. Installing the Bulb: The light bulb (G) is screwed into the socket (C). The manual specifies that a 9-watt LED bulb is included in the box, but the lamp is also compatible with other bulb types up to a maximum of 100-watt for incandescent (Type "A"), 23-watt for CFL, or 12-watt for LED.
5. Final Check: After assembly, the user is advised to place the lamp on a level surface to ensure everything is stable before use.

The lamp's polarized plug is a key safety feature. If the plug does not fit fully into an outlet, the user should reverse the plug. If it still does not fit, a qualified electrician should be contacted. Users are explicitly warned not to use an extension cord unless the plug can be fully inserted into it, and not to attempt to bypass this safety feature. The external flexible cable or cord of this lamp cannot be replaced; if it is damaged, the lamp must be destroyed to prevent hazards.

Maintenance Features

Proper maintenance is essential for the longevity and safe operation of the lamp. The manual provides clear guidelines for care:

• Cleaning Lamps: Before cleaning, lamps should always be unplugged from the power source to prevent electrical shock.
• Cleaning Shades: Lamp shades should be dusted with a feather duster or cleaned with an appropriate vacuum-brush attachment. This helps to remove dust and maintain the appearance of the shade without damaging the material.
• Cleaning Bases: Lamp bases should be wiped with a soft, dry cloth. The cleaning methods for the base should be appropriate to the material of the base itself.
• Chemical Avoidance: Users are specifically warned to avoid the use of chemicals and household cleaners, as these can damage the finish of the lamp base.

The manual also includes a critical warning regarding initial inspection: "INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED." This emphasizes the importance of checking for any issues before assembly, as installation may void return eligibility for damaged goods. This ensures that any manufacturing defects are identified early, preventing potential safety hazards or functional problems.

JONATHAN Y JYL3071A Specifications