To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y JYL3001A and is the answer not in the manual?
This document outlines the assembly, usage, and maintenance of a JONATHAN Y floor lamp, model JYL3001A. The lamp is designed for indoor use and requires some assembly before operation.
The JONATHAN Y JYL3001A is a floor lamp intended to provide ambient or task lighting in a room. It operates by converting electrical energy into light through a bulb inserted into its socket. The lamp features a traditional design with a base, multiple body sections, a saddle, a harp, a shade, and a finial. It is designed to be placed on a level surface and connected to a standard electrical outlet. The lamp is equipped with a polarized plug as a safety feature to reduce the risk of electric shock, ensuring it can only be inserted into a polarized outlet in one specific orientation.
Before initial use, the lamp requires assembly, which is estimated to take approximately 6 minutes. The assembly process involves screwing together the various body sections, attaching them to the lamp base, inserting the harp into the saddle, placing the shade onto the harp, securing it with the finial, and finally inserting the bulb into the socket. It is crucial to ensure all parts are aligned correctly during assembly and to avoid over-tightening the lamp body sections to prevent damage to the base screw. Care should also be taken to prevent twisting the power cord during assembly.
The lamp is designed to accommodate specific bulb types and wattages to ensure safe and optimal performance. It can use an ON/OFF type "A" bulb with a maximum of 100 watts, a CFL bulb with a maximum of 23 watts, or an LED bulb with a maximum of 12 watts. The product typically includes a 9-watt LED bulb in the box, ready for immediate use after assembly.
For safe operation, it is imperative to switch off the main electrical supply from the main fuse box or circuit breaker before installation or any maintenance involving electrical components. Users should inspect the item carefully for any damage or obvious defects before attempting to install it, as a damaged item should not be installed and may not be eligible for return once installed.
The polarized plug is a key safety feature. If the plug does not fit fully into the outlet, the user should reverse the plug. If it still does not fit, a qualified electrician should be contacted. It is strongly advised not to use an extension cord unless the plug can be fully inserted into it, and users should never attempt to defeat this safety feature. After assembly, the lamp should be placed on a level surface to ensure stability before use.
Proper care and maintenance are essential to prolong the life and maintain the appearance of the JYL3001A floor lamp. Before performing any cleaning, the lamp should be unplugged from the electrical outlet to prevent electrical hazards.
For cleaning the shades, a feather duster or an appropriate vacuum-brush attachment can be used to remove dust. This gentle approach helps preserve the integrity of the shade material.
The lamp bases should be cleaned with a soft, dry cloth. The cleaning methods for the base should be appropriate for the material it is made from. It is crucial to avoid the use of chemicals and household cleaners on the lamp bases, as these can potentially damage the finish and alter the aesthetic appeal of the lamp.
In the event that the external flexible cable or cord of the luminaire becomes damaged, it cannot be replaced by the user. If the cord is damaged, the entire luminaire must be destroyed to prevent safety risks. This highlights the importance of careful handling of the power cord to avoid damage. Regular inspection of the cord for any signs of wear or damage is also recommended as part of routine maintenance.
General| Product Type | Table Lamp |
|---|---|
| Brand | JONATHAN Y |
| Model Number | JYL3001A |
| Material | Metal |
| Color | Gold |
| Shade Diameter | 12 inches |
| Bulb Type | LED |
| Wattage | 9W |
| Base Material | Metal |
| Shade Color | White |
| Base Color | Gold |
| Bulb Included | Yes |
| Voltage | 120V |
| Switch Type | Rotary |
