JONATHAN Y JYL3010A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
WARNING
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
CARE AND MAINTENANCE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Part List and Hardware List
Model# JYL3010A
Product Dimensions: 16"L X 16"W X
26"H

JONATHAN Y JYL3010A Specifications

General

Brand	JONATHAN Y
Model	JYL3010A
Category	Home Lighting
Language	English

Summary

General Warnings and Safety

Electrical Installation Warning

Recommend installation by a licensed electrician and to switch off power before installation.

Inspection Before Installation

Inspect the item carefully for damage or defects before installation; do not install if damaged.

Care and Maintenance Instructions

Cleaning Procedures

Unplug lamps before cleaning. Use feather duster or vacuum for shades; soft dry cloth for bases.

Chemical Usage Warning

Avoid chemicals and household cleaners as they may damage the lamp's finish.

Important Safety and Assembly Guidelines

Pre-Assembly Checks

Verify all parts are present before assembly and assemble on a soft surface to prevent scratching.

Safe Use and Installation

Follow guidelines to reduce risk of fire, electrical shock, or injury.

Cord and Plug Safety

The flexible cable cannot be replaced; polarized plug must fit outlet fully for electrical safety.

Product Specifications and Parts List

Model and Dimensions

Model JYL3010A with product dimensions 16"L x 16"W x 26"H.

Part Identification

List of components including Lamp base, Saddle, Socket, Harp, Shade, Finial, and Bulb.

Assembly Instructions

Preparation and Bulb Type

Ensure all parts are present. Use specified bulb types: Max 100W A-type, 23W CFL, or 12W LED.

Step 1: Lamp Assembly

Assemble harp, shade, finial, and insert bulb into socket as per diagram.

Step 2: Stability Check

Place the assembled lamp on a level surface to check if everything is stable.