JONATHAN Y JYL3003A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the

outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord

unless the plug can be fully inserted. do not attempt to defeat this safety feature.

WARNING

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model# JYL3003A

Product Dimensions: 15"Lx 15"W x 27"H

CARE AND MAINTENANCE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

Part List and Hardware List

Need help?

Do you have a question about the JONATHAN Y JYL3003A and is the answer not in the manual?

Summary

Safety and Installation Guidelines

General Warnings

Recommendations for professional installation and pre-installation inspection for defects.

Electrical Safety Precautions

Switch off main electrical supply before installation and follow polarized plug safety guidelines.

Handling and Assembly Safety

Assemble on a soft surface to prevent scratching and follow guidelines to reduce injury risk.

Cord Safety

The external flexible cable cannot be replaced; if damaged, the luminaire shall be destroyed.

Care and Maintenance

Cleaning Instructions

Unplug before cleaning. Use soft cloth and appropriate tools; avoid chemicals to protect the finish.

Assembly Instructions

Preparation

Ensure all parts are present before assembly. Use specified bulb types for safe operation.

Step 1: Base and Neck Assembly

Connect the Neck (B) to the Lamp base (A), ensuring the power cord is not twisted.

Step 2: Shade and Bulb Installation

Insert Harp (E) into Saddle (C), attach Shade (F), secure with Finial (G), and insert Bulb (H).

Step 3: Stability Check

Place the assembled light on a level surface to confirm stability.

This document provides comprehensive instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL3003A lamp. It includes a warning about professional installation, safety instructions, a detailed parts list, and step-by-step assembly instructions.

Function Description:

The JYL3003A is a portable table lamp designed to provide illumination. It features a traditional design with a lamp base, neck, saddle, socket, harp, shade, finial, and a bulb. The lamp is designed for indoor use and operates with a polarized plug for enhanced safety.

Important Technical Specifications:

Model Number: JYL3003A
Product Dimensions: 15"L x 15"W x 27"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 100-watt
- CFL Bulb: Maximum 23-watt
- LED Bulb: Maximum 12-watt
Included Bulb: 9-watt LED bulb
Plug Type: Polarized plug (one blade wider than the other)
Power Cord: External flexible cable or cord (not replaceable; if damaged, the luminaire must be destroyed)
Assembly Time: Estimated 6 minutes

Usage Features:

Assembly: The lamp requires simple assembly, which involves connecting the neck to the base, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
Power Connection: The lamp connects to a standard electrical outlet via a polarized plug. Users are instructed to ensure the plug fits fully into the outlet; if not, they should reverse it. If it still doesn't fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into it.
Bulb Installation: The lamp comes with a 9-watt LED bulb, but it is compatible with various bulb types up to specific wattage limits (100W incandescent, 23W CFL, 12W LED).
Stability Check: After assembly, users are advised to place the lamp on a level surface to ensure stability.

Maintenance Features:

Cleaning:
- Always unplug the lamp before cleaning.
- Shades: Dust with a feather duster or an appropriate vacuum-brush attachment.
- Lamp Bases: Wipe with a soft, dry cloth. Clean lamp bases using methods appropriate to the material of the base.
- Chemicals: Avoid the use of chemicals and household cleaners, as they may damage the finish.
Safety Precautions:
- Installation: Installation should ideally be performed by a licensed electrician. Before installation, switch off the main electrical supply from the main fuse box/circuit breaker.
- Inspection: Carefully inspect the item before attempting to install. Do not install if there is any damage or obvious defect, as the item cannot be returned once installed.
- Assembly Surface: Assemble the item on a soft surface to prevent scratching the finish.
- Electrical Safety: To reduce the risk of fire, electrical shock, or injury, follow all guidelines for safe use and installation.
- Polarized Plug: The polarized plug is a safety feature to reduce the risk of electric shock. Do not attempt to defeat this safety feature.
- Damaged Cord: If the external flexible cable or cord is damaged, the luminaire must be destroyed as the cord is not replaceable.

Parts List (for assembly):

A: Lamp base (Quantity: 1)
B: Neck (Quantity: 1)
C: Saddle (Quantity: 1)
D: Socket (Quantity: 1)
E: Harp (Quantity: 1)
F: Shade (Quantity: 1)
G: Finial (Quantity: 1)
H: Bulb (Quantity: 1)

The manual emphasizes the importance of checking all parts before beginning assembly and not attempting to assemble if any part is missing or damaged. It also highlights the non-returnable nature of the item once installed.