JONATHAN Y JYL3007A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft, dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# JYL3007A
Product Dimensions: 12"Lx 12"W x 20.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D
Socket
1X
H
Bulb
1X
D
S
oc
k
e
t
1X
H
B
u
lb
1X

JONATHAN Y JYL3007A Specifications

General

Brand	JONATHAN Y
Model	JYL3007A
Category	Home Lighting
Language	English

Summary

Care and Maintenance

Cleaning Instructions

Unplug lamps before cleaning. Dust shades with feather duster or vacuum brush. Wipe bases with a soft, dry cloth.

Important Safety Instructions

Pre-Assembly Checks

Verify all parts, assemble on a soft surface to prevent scratches, and follow installation guidelines to reduce risk.

Cord Replacement and Plug Safety

The flexible cable cannot be replaced. Use polarized plug only in polarized outlets; do not defeat safety feature.

Preparation and Assembly Steps

Product Preparation

Ensure all parts are present before beginning assembly. Check against package and hardware contents lists.

Bulb Usage Guidelines

Use 'A' type bulb max 60W, CFL max 13W, or LED max 9W. An LED 9-watt bulb is included.

Assembly Step 1

Connect Neck (B) to Base (A), screwing securely while being careful not to twist the power cord.

Assembly Step 2

Insert Harp (E) into Saddle (C), attach Shade (F), tighten Finial (G), and insert Bulb (H) into Socket (D).

Assembly Step 3

Place the assembled lamp on a level surface and check for stability.