JONATHAN Y JYL3004A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the

outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord

unless the plug can be fully inserted. do not attempt to defeat this safety feature.

WARNING

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model# JYL3004A

Product Dimensions: 12"Lx 12"W x 23"H

CARE AND MAINTENANCE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

Part List and Hardware List

Need help?

Do you have a question about the JONATHAN Y JYL3004A and is the answer not in the manual?

Summary

Product Warnings and Safety Instructions

Installation Recommendation

Recommend installation of this lighting fixture be done by a licensed electrician.

Electrical Safety Precautions

Switch off the main electrical supply from the main fuse box/circuit breaker before installation.

Pre-Installation Inspection

Inspect item carefully for damage or defects before installation.

Return Policy

Item may not be returned once it has been installed.

Care and Maintenance Guidelines

Instructions for cleaning and maintaining the lamp without damaging its finish.

Important Assembly Safety

Ensure all parts are present and assemble on a soft surface to prevent scratches.

Electrical Shock Prevention

Use polarized plug correctly; do not use extension cords if plug does not fit fully.

Product Preparation and Assembly

Pre-Assembly Checks

Verify all parts are present before starting assembly.

Bulb Compatibility

Use Type 'A' bulb (max 60W), CFL (max 13W), or LED (max 9W).

Step 1: Base and Neck Assembly

Connect the power cord to the neck and screw the neck onto the lamp base.

Step 2: Harp, Shade, and Finial Assembly

Insert harp, attach shade, tighten finial, and screw in the bulb.

Step 3: Stability Check

Place the light on a level surface to ensure it is stable.

Summary

Product Warnings and Safety Instructions

Installation Recommendation

Recommend installation of this lighting fixture be done by a licensed electrician.

Electrical Safety Precautions

Switch off the main electrical supply from the main fuse box/circuit breaker before installation.

Pre-Installation Inspection

Inspect item carefully for damage or defects before installation.

Return Policy

Item may not be returned once it has been installed.

Care and Maintenance Guidelines

Instructions for cleaning and maintaining the lamp without damaging its finish.

Important Assembly Safety

Ensure all parts are present and assemble on a soft surface to prevent scratches.

Electrical Shock Prevention

Use polarized plug correctly; do not use extension cords if plug does not fit fully.

Product Preparation and Assembly

Pre-Assembly Checks

Verify all parts are present before starting assembly.

Bulb Compatibility

Use Type 'A' bulb (max 60W), CFL (max 13W), or LED (max 9W).

Step 1: Base and Neck Assembly

Connect the power cord to the neck and screw the neck onto the lamp base.

Step 2: Harp, Shade, and Finial Assembly

Insert harp, attach shade, tighten finial, and screw in the bulb.

Step 3: Stability Check

Place the light on a level surface to ensure it is stable.

This document provides instructions for the assembly, care, and safe use of a portable table lamp, model JYL3004A, from JONATHAN Y. The lamp is designed for indoor use and features a traditional design with a lamp base, neck, saddle, socket, harp, shade, finial, and bulb.

Function Description

The primary function of this device is to provide illumination in an indoor setting. It operates by converting electrical energy into light through a replaceable bulb. The lamp is designed to be a stationary light source, typically placed on a table or other flat surface. It features a polarized plug as a safety mechanism to reduce the risk of electric shock, ensuring it can only be inserted into a polarized outlet in one orientation. The lamp is compatible with various bulb types, including incandescent (Type "A" bulb max 60-watt), CFL (max 13-watt), or LED (max 9-watt), and comes with a 9-watt LED bulb included.

Usage Features

Assembly: The lamp requires simple assembly, which is estimated to take approximately 6 minutes. The process involves connecting the neck to the lamp base, inserting the harp into the saddle, placing the shade onto the harp, securing it with the finial, and finally, inserting the bulb into the socket. Users are advised to assemble the item on a soft surface to prevent scratching the finish.
Power Connection: The lamp connects to a standard electrical outlet via a power cord. It is crucial to ensure the power cord is not twisted during assembly and is tightened securely.
Polarized Plug: A key safety feature is the polarized plug, which has one blade wider than the other. This design ensures the plug fits into a polarized outlet only one way, reducing the risk of electric shock. If the plug does not fit fully, users are instructed to reverse it. If it still doesn't fit, a qualified electrician should be contacted. The use of extension cords is permissible only if the plug can be fully inserted into the extension cord. Users are explicitly warned against attempting to defeat this safety feature.
Bulb Compatibility: The lamp is versatile in its bulb compatibility, supporting different types and wattages. This allows users to choose bulbs based on their preference for light intensity and energy efficiency. The inclusion of a 9-watt LED bulb provides an immediate, energy-efficient lighting solution upon purchase.
Stability Check: After assembly, users are instructed to place the lamp on a level surface to check for stability, ensuring safe operation.

Maintenance Features

Cleaning: Regular cleaning is recommended to maintain the lamp's appearance. Before cleaning, the lamp should always be unplugged from the power source.
- Shades: Shades can be dusted with a feather duster or cleaned with an appropriate vacuum-brush attachment.
- Lamp Bases: Lamp bases should be wiped with a soft, dry cloth. The cleaning method for the base should be appropriate to its material.
Chemical Avoidance: Users are advised to avoid using chemicals and household cleaners on the lamp, as these can damage the finish.
Professional Installation Recommendation: While assembly is straightforward, the manufacturer recommends that installation of this lighting fixture be done by a licensed electrician, particularly concerning the electrical supply connection, to ensure safety and proper functioning.
Pre-Installation Inspection: Before attempting to install, users should carefully inspect the item for any damage or obvious defects. If any are found, the item should not be installed, as it cannot be returned once installed.
Power Disconnection for Installation: A critical safety instruction for installation is to switch off the main electrical supply from the main fuse box/circuit breaker before beginning work.
Cord Damage: The external flexible cable or cord of the luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed to prevent hazards. This highlights the importance of careful handling of the power cord.
No User Servicing of Internal Components: The instructions do not provide guidance for internal repairs or component replacement beyond the bulb, emphasizing that the lamp is designed for user-level assembly and external maintenance only. Any issues beyond these points, especially concerning the electrical cord, necessitate replacement of the entire unit.