JONATHAN Y Stockholm User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A.B.C.D Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model# JYL3045A
Product Dimensions: 17"Lx 17"W x 28"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y Stockholm Specifications

General

Brand	JONATHAN Y
Model	Stockholm
Category	Home Lighting
Product Type	Table Lamp
Base Material	Metal
Material	Metal

Summary

Safety Warnings and Instructions

General Warnings

Inspect item carefully before installation. Do not install if damaged. Item may not be returned once installed.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow guidelines to reduce risk of fire, shock, or injury.

Polarized Plug Safety Feature

Lamp has a polarized plug to reduce electric shock risk. It fits outlet one way. Contact electrician if plug doesn't fit.

Care and Maintenance

Part List and Hardware

Assembly Instructions

Step 1: Connect Neck to Base

Pull power cord, connect Neck (B) to Base (A). Screw Neck onto Base. Avoid twisting power cord.

Step 2: Assemble Harp, Shade, and Bulb

Insert Harp (E) into Saddle (C). Place Shade (F) on Harp (E). Tighten Finial (G) onto Harp (E). Insert Bulb (H) into Socket (D).

Step 3: Stability Check

Place the lamp on a level surface to check if everything is stable.