JONATHAN Y Spaulding JYL3551A

To Next Page

Model#: JYL3551A

Product Dimensions: 31.5''W X 7.75"H X 5.5"E

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use

and installation

*The external flexible cable or cord of this lamp cannot be replaced

If the cord is damaged, the lamp shall be destroyed

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe

the surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the

fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the

interior surface of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

1/2

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A mounting screw 2X G Screwed Ball 2X

B mounting plate 1X H bulb 4X

C ground screw 1X I Socket ring 4X

D Machine Screw 2X J Glass 4X

E wire connector 3X

F body 1X

Part List and Hardware List

1/2

Need help?

Do you have a question about the JONATHAN Y Spaulding JYL3551A and is the answer not in the manual?

Summary

General Warnings and Precautions

Care and Maintenance

Exterior Cleaning

Clean the fixture's exterior with a dry or slightly dampened clean cloth, avoiding solvents.

Interior Cleaning

Disconnect power before cleaning the interior with a dry or slightly dampened cloth.

Preparation and Assembly Steps

Summary

General Warnings and Precautions

Care and Maintenance

Exterior Cleaning

Clean the fixture's exterior with a dry or slightly dampened clean cloth, avoiding solvents.

Interior Cleaning

Disconnect power before cleaning the interior with a dry or slightly dampened cloth.

Preparation and Assembly Steps

This document describes the assembly, installation, and maintenance of the JONATHAN Y Model JYL3551A lighting fixture.

Function Description:

The JYL3551A is a multi-bulb lighting fixture designed for indoor use. It provides illumination through four light sources, each enclosed by a glass shade. The fixture is intended to be hardwired into an existing electrical outlet box, making it a permanent lighting solution. Its design suggests a decorative as well as functional purpose, suitable for various interior spaces.

Important Technical Specifications:

Model Number: JYL3551A
Product Dimensions: 31.5" W x 7.75" H x 5.5" E (Width, Height, Extension from wall)
Bulb Type: On/Off Type "A"
Maximum Wattage (Incandescent): 40-watt per bulb
Maximum Wattage (CFL): 13-watt per bulb
Maximum Wattage (LED): 9-watt per bulb
Included Bulbs: 4 pieces of 4-watt LED bulbs are included in the box.
Power Source: Hardwired to main electrical supply.
Electrical Connection: Requires connection to hot (black/red), neutral (white), and ground wires.
Mounting: Secured to a standard electrical outlet box using a mounting plate and screws.

Usage Features:

Assembly: The fixture requires assembly, which is estimated to take 20 minutes. It involves threading mounting screws, connecting wires, orienting the body, attaching glass shades, and installing bulbs.
Bulb Installation: The fixture accommodates four bulbs. Users are instructed to install bulbs (H) and ensure the wattage does not exceed the specified maximums (40W incandescent, 13W CFL, or 9W LED). The product comes with four 4-watt LED bulbs.
Wire Connection: Detailed instructions are provided for connecting the fixture's wires to the outlet box's supply wires (hot, neutral, ground). A reference chart clarifies connections for different wire types (e.g., black/red to hot, white to neutral, ground to ground). Special notes are included for parallel cord wiring (SPT I & SPT II), distinguishing neutral (square/ridged) from hot (round/smooth) wires.
Grounding Instructions: Specific grounding procedures are outlined for installations in the United States and Canada, emphasizing the importance of securing the ground wire to the green ground screw on the mounting plate.
Safety Precautions:
- Installation by a licensed electrician is recommended.
- The main electrical supply must be switched off at the fuse box/circuit breaker before installation.
- The item should be inspected for damage or defects before installation; damaged items should not be installed or returned.
- Assembly should be performed on a soft surface to prevent scratching.
- Instructions emphasize reducing the risk of fire, electrical shock, or injury.
- The external flexible cable or cord of this lamp cannot be replaced; if damaged, the lamp must be destroyed.
- Electrical current must be turned off when changing bulbs.

Maintenance Features:

Cleaning the Outside: Use a dry or slightly dampened clean cloth (with clean water, no solvents) to wipe the surface.
Cleaning the Inside: First, disconnect power by turning off the circuit breaker or removing the fuse. Then, use a dry or slightly dampened clean cloth (with clean water, no solvents) to wipe the interior surface.
Prohibited Cleaners: Do not use any cleaners containing chemicals, solvents, or harsh abrasives. Only a dry, soft cloth should be used for dusting or careful wiping.