JONATHAN Y JYL1021 - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL1021

Product Dimensions: 9"Lx 9"W x 20"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an

extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

PREPARATION

Need help?

Do you have a question about the JONATHAN Y JYL1021 and is the answer not in the manual?

Summary

Product Safety and Handling

General Warnings

Inspect item carefully before installation; do not install if damaged.

Care and Maintenance

Unplug lamps before cleaning; use soft cloths and appropriate methods for bases.

Important Safety Instructions

Ensure all parts, assemble on soft surface, follow safety guidelines for use.

Assembly Instructions

Step 1: Connect Neck to Base

Pull power cord to connect Neck (B) to Base (A) and screw securely.

Step 2: Install Harp, Shade, and Bulb

Insert Harp (E), attach Shade (F), tighten Finial (G), and insert Bulb (H).

Step 3: Stability Check

Place light on a level surface to confirm stability.

Summary

Product Safety and Handling

General Warnings

Inspect item carefully before installation; do not install if damaged.

Care and Maintenance

Unplug lamps before cleaning; use soft cloths and appropriate methods for bases.

Important Safety Instructions

Ensure all parts, assemble on soft surface, follow safety guidelines for use.

Assembly Instructions

Step 1: Connect Neck to Base

Pull power cord to connect Neck (B) to Base (A) and screw securely.

Step 2: Install Harp, Shade, and Bulb

Insert Harp (E), attach Shade (F), tighten Finial (G), and insert Bulb (H).

Step 3: Stability Check

Place light on a level surface to confirm stability.

This document provides comprehensive instructions for the assembly, care, and safe use of the JONATHAN Y Model# JYL1021 table lamp.

Function Description:

The JYL1021 is a portable table lamp designed to provide illumination in a home or office setting. It features a traditional design with a lamp base, neck, saddle, socket, harp, shade, finial, and a bulb. The lamp operates with an on/off switch and is designed for easy assembly and placement on a level surface.

Important Technical Specifications:

Model Number: JYL1021
Product Dimensions: 9"L x 9"W x 20"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 40-Watt
- CFL Bulb: Maximum 13-Watt
- LED Bulb: Maximum 9-Watt
Included Bulb: The lamp comes with an LED 4-Watt bulb in the box.
Electrical Safety Feature: The lamp is equipped with a polarized plug, where one blade is wider than the other. This is a safety feature to reduce the risk of electric shock. The plug is designed to fit into a polarized outlet only one way. If it does not fit fully, the user is instructed to reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into it. Users are explicitly warned not to disregard this safety feature.
Cord Replacement: The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp must be destroyed.

Usage Features:

Assembly: The estimated assembly time is 6 minutes. The assembly process involves connecting the neck to the lamp base, screwing them together, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and finally inserting the bulb into the socket. Users are advised to assemble the item on a soft surface to prevent scratching the finish.
Polarized Plug: As a safety feature, the lamp has a polarized plug. Users must ensure the plug is inserted correctly into a polarized outlet.
Bulb Installation: The lamp accommodates various bulb types within specified wattage limits, with an LED 4-watt bulb included.
Stability Check: After assembly, users are instructed to place the light on a level surface to check if everything is stable.
Safety Guidelines: The manual emphasizes following guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury to persons or property.

Maintenance Features:

Cleaning Lamps: Before cleaning, lamps should be unplugged.
Cleaning Shades: Shades can be dusted with a feather duster or an appropriate vacuum-brush attachment.
Cleaning Lamp Bases: Lamp bases should be wiped with a soft, dry cloth. The cleaning method for the base should be appropriate to its material.
Chemical Avoidance: Users are warned to avoid the use of chemicals and household cleaners, as they may damage the finish of the lamp.
Pre-Installation Inspection: Before attempting to install, users must carefully inspect the item for any damage or obvious defects. If any are found, the item should not be installed. The manual states that the item may not be returned once it has been installed.
Parts Verification: Before beginning assembly, users must ensure all parts indicated in the part list are present and compare them with the package contents. If any part is missing or damaged, assembly should not be attempted.