JONATHAN Y JYL2007A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL2007A

Product Dimensions: 10"Lx 10"W x 25.5"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL2007A and is the answer not in the manual?

Summary

Important Safety Instructions

Check Parts and Assembly Surface

Ensure all parts are present and assemble on a soft surface to prevent scratches.

Electrical Safety and Cord Handling

Follow guidelines for safe use, electrical shock prevention, and cord replacement.

Polarized Plug Usage

Understand the polarized plug's safety feature and proper outlet insertion.

Preparation and Assembly

Assembly Time and Bulb Recommendation

Estimated assembly time is 6 minutes. Use specified bulb types and wattages for safety and performance.

Summary

Important Safety Instructions

Check Parts and Assembly Surface

Ensure all parts are present and assemble on a soft surface to prevent scratches.

Electrical Safety and Cord Handling

Follow guidelines for safe use, electrical shock prevention, and cord replacement.

Polarized Plug Usage

Understand the polarized plug's safety feature and proper outlet insertion.

Preparation and Assembly

Assembly Time and Bulb Recommendation

Estimated assembly time is 6 minutes. Use specified bulb types and wattages for safety and performance.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model JYL2007A lamp.

Function Description:

The JYL2007A is a portable lamp designed to provide illumination. It features a base, neck, saddle, socket, harp, shade, finial, and a bulb. The lamp operates with a polarized plug as a safety feature to reduce the risk of electric shock. It is an on/off type lamp, meaning it has a simple switch for turning the light on and off.

Important Technical Specifications:

Model Number: JYL2007A
Product Dimensions: 10"L x 10"W x 25.5"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 60-watt
- CFL Bulb: Maximum 13-watt
- LED Bulb: Maximum 9-watt
Included Bulb: The lamp comes with a 9-watt LED bulb.
Plug Type: Polarized plug (one blade wider than the other) for safety.

Usage Features:

Assembly: The estimated assembly time is 6 minutes. The assembly process involves three main steps:
1. Connecting the Neck (B) to the Lamp base (A) by pulling the power cord and screwing the neck onto the base. Care must be taken not to twist the power cord and to tighten securely.
2. Inserting the Harp (E) into the Saddle (C), placing the Shade (F) on the Harp (E), tightening the Finial (G) into the Harp (E), and inserting the Bulb (H) into the Socket (D).
3. Placing the assembled lamp on a level surface to check for stability.
Safety Instructions:
- Always ensure all parts are present before beginning assembly.
- Assemble the item on a soft surface to prevent scratching the finish.
- To reduce the risk of fire, electrical shock, or injury, follow the provided guidelines for safe use and installation.
- The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp must be destroyed.
- The polarized plug is a safety feature. It will only fit into a polarized outlet one way. If it does not fit fully, reverse the plug. If it still does not fit, contact a qualified electrician.
- Never use the lamp with an extension cord unless the plug can be fully inserted. Do not attempt to bypass this safety feature.
Part List:
- A: Lamp base (1X)
- B: Neck (1X)
- C: Saddle (1X)
- D: Socket (1X)
- E: Harp (1X)
- F: Shade (1X)
- G: Finial (1X)
- H: Bulb (1X)

Maintenance Features:

Pre-Installation Inspection: Carefully inspect the item before attempting to install. If there is any damage or obvious defect, do not install. Installed items cannot be returned.
Cleaning:
- Unplug the lamp before using any cleaning solutions.
- Dust shades with a feather duster or an appropriate vacuum-brush attachment.
- Wipe lamp bases with a soft, dry cloth, using methods appropriate to the material of the base.
- Avoid using chemicals and household cleaners, as they may damage the finish.