JONATHAN Y JYL2038A - User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
WARNING
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# JYL2038A
Product Dimensions: 13"Lx 13"W x 24"H
CARE AND MAINTENANCE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
Part List and Hardware List
1/2

Summary

Care and Maintenance

Cleaning Instructions

Unplug lamps before cleaning. Dust shades with feather duster or vacuum attachment. Wipe bases with a soft, dry cloth; avoid chemicals.

Important Safety Instructions

General Safety Precautions

Verify all parts are present before assembly. Assemble on a soft surface. Follow guidelines for safe use and installation to prevent hazards.

Cord and Plug Safety

The external flexible cable cannot be replaced. The polarized plug is a safety feature; if it does not fit, contact an electrician.

Product Preparation and Assembly

Bulb Usage Guidelines

Use ON/OFF type 'A' bulb max 100W, CFL max 23W, or LED max 12W. A 9-watt LED bulb is included.

Assembly Steps

Follow sequential steps to connect the neck to the base, attach the shade via harp and finial, and insert the bulb.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Assembly Steps
6. Parts List
7. Important Safety Instructions

This document provides comprehensive instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL2038A lamp.

Function Description:

The JYL2038A is a portable electric lamp designed to provide illumination. It consists of a lamp base, neck, saddle, socket, harp, shade, finial, and a bulb. The lamp operates by connecting to a standard electrical outlet and uses a polarized plug as a safety feature.

Important Technical Specifications:

• Model Number: JYL2038A
• Product Dimensions: 13"L x 13"W x 24"H
• Bulb Type (Recommended):
  • ON/OFF Type "A" Bulb: Maximum 100-watt
  • CFL Bulb: Maximum 23-watt
  • LED Bulb: Maximum 12-watt
• Included Bulb: The lamp comes with a 9-watt LED bulb.
• Electrical Safety: Features a polarized plug (one blade wider than the other) to reduce the risk of electric shock. This plug is designed to fit into a polarized outlet only one way.
• External Cord: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.

Usage Features:

• Assembly: The lamp requires assembly, which is estimated to take 6 minutes. The assembly process involves connecting the neck to the lamp base, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
• Power Connection: The lamp connects to a standard electrical outlet via its polarized plug. Users are advised to ensure the plug is fully inserted into the outlet. If it does not fit, reversing the plug or contacting a qualified electrician is recommended. Extension cords should only be used if the plug can be fully inserted.
• Bulb Installation: The lamp is designed for easy bulb replacement. The included 9-watt LED bulb should be inserted into the socket (D).
• Stability Check: After assembly, the lamp should be placed on a level surface to verify its stability.

Maintenance Features:

• Cleaning:
  • Shades: Dust with a feather duster or an appropriate vacuum-brush attachment.
  • Lamp Bases: Wipe with a soft, dry cloth. The cleaning method should be appropriate for the material of the lamp base.
  • Chemical Avoidance: Avoid using chemicals and household cleaners, as they may damage the finish of the lamp.
• Pre-Installation Inspection: Before installation, users must carefully inspect the item for any damage or obvious defects. If damage is found, the item should not be installed and cannot be returned once installed.
• Professional Installation Recommendation: Installation of this lighting fixture is recommended to be done by a licensed electrician.
• Electrical Safety Precaution: Before installation, users must switch off the main electrical supply from the main fuse box/circuit breaker.
• Cord Damage: If the external flexible cable or cord is damaged, the luminaire must be destroyed as the cord cannot be replaced.

Assembly Steps:

1. Step 1: Pull the power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A), being careful not to twist the power cord, and tighten securely.
2. Step 2: Insert the Harp (E) into the Saddle (C). Place the Shade (F) on the Harp (E), then tighten the Finial (G) into the Harp (E). Insert the Bulb (H) into the Socket (D).
3. Step 3: Place the light on a level surface to check if everything is stable.

Parts List:

• A: Lamp base (Quantity: 1X)
• B: Neck (Quantity: 1X)
• C: Saddle (Quantity: 1X)
• D: Socket (Quantity: 1X)
• E: Harp (Quantity: 1X)
• F: Shade (Quantity: 1X)
• G: Finial (Quantity: 1X)
• H: Bulb (Quantity: 1X)

Important Safety Instructions:

• Ensure all parts are present before beginning assembly.
• Assemble the item on a soft surface to prevent scratching the finish.
• Follow guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
• Do not attempt to defeat the safety feature of the polarized plug.
• Never use an extension cord unless the plug can be fully inserted.

This comprehensive overview covers the essential aspects of the JONATHAN Y Model# JYL2038A lamp, from its basic function to detailed maintenance and safety protocols.

JONATHAN Y JYL2038A Specifications