EasyManua.ls Logo

JONATHAN Y JYL1044A - User Manual

Default Icon
2 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL1044A
Product Dimensions: 12"Lx 8"W x 13.5"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X C Socket 1X
B Shade 1X D Bulb 1X
Question and Answer IconNeed help?

Do you have a question about the JONATHAN Y JYL1044A and is the answer not in the manual?

Summary

General Warnings and Safety

Pre-Installation Inspection Warning

Inspect item carefully for damage or defects before installation. Do not install if damaged.

Important Safety Instructions

Follow safety guidelines for assembly and use to reduce risk of fire, shock, or injury. Handle cord with care.

Lamp Care and Maintenance

Lamp Cleaning Guide

Unplug lamps before cleaning. Dust shades with feather duster or vacuum brush. Wipe bases with soft cloth.

Assembly Preparation and Steps

Pre-Assembly Checks

Ensure all parts are present and undamaged before beginning assembly. Compare with contents list.

Bulb Type and Wattage

Use ON/OFF Type 'A' bulb max 40W, CFL max 13W, or LED max 9W. LED 4W bulb is included.

Step 1: Insert Bulb

Insert the bulb (D) into the socket (C) for assembly.

Step 2: Stability Check

Place the assembled lamp on a level surface to check for stability.

Summary

General Warnings and Safety

Pre-Installation Inspection Warning

Inspect item carefully for damage or defects before installation. Do not install if damaged.

Important Safety Instructions

Follow safety guidelines for assembly and use to reduce risk of fire, shock, or injury. Handle cord with care.

Lamp Care and Maintenance

Lamp Cleaning Guide

Unplug lamps before cleaning. Dust shades with feather duster or vacuum brush. Wipe bases with soft cloth.

Assembly Preparation and Steps

Pre-Assembly Checks

Ensure all parts are present and undamaged before beginning assembly. Compare with contents list.

Bulb Type and Wattage

Use ON/OFF Type 'A' bulb max 40W, CFL max 13W, or LED max 9W. LED 4W bulb is included.

Step 1: Insert Bulb

Insert the bulb (D) into the socket (C) for assembly.

Step 2: Stability Check

Place the assembled lamp on a level surface to check for stability.

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Maintenance Features

This document provides instructions for the assembly, care, and use of the JONATHAN Y Model# JYL1044A portable lamp.

Function Description:

The JYL1044A is a portable lamp designed to provide illumination. It features a lamp base, a shade, a socket, and a bulb. The lamp is intended for indoor use and is equipped with a polarized plug as a safety feature to reduce the risk of electric shock.

Important Technical Specifications:

  • Model Number: JYL1044A
  • Product Dimensions: 12" Length x 8" Width x 13.5" Height
  • Bulb Type: The lamp is designed to use an ON/OFF Type "A" bulb with a maximum wattage of 40-watts. Alternatively, it can accommodate a CFL bulb with a maximum of 13-watts or an LED bulb with a maximum of 9-watts. The product includes a 4-watt LED bulb in the box.
  • Plug Type: Polarized plug (one blade wider than the other) for enhanced safety. This plug is designed to fit into a polarized outlet in only one way.
  • Cable/Cord: The external flexible cable or cord of this lamp is not replaceable. If the cord is damaged, the lamp should be destroyed to prevent hazards.

Usage Features:

  • Assembly: The lamp requires minimal assembly, estimated to take approximately 6 minutes. The assembly process involves inserting the provided bulb into the socket and then placing the assembled lamp on a level surface to ensure stability.
  • Safety Instructions:
    • Before assembly, users must ensure all parts are present and undamaged. If any part is missing or defective, installation should not be attempted, and the item should not be returned once installed.
    • Assembly should be performed on a soft surface to prevent scratching the lamp's finish.
    • To mitigate risks of fire, electrical shock, or injury, users must adhere to the provided guidelines for safe use and installation.
    • The polarized plug is a critical safety feature. It must be inserted into a polarized outlet correctly. If the plug does not fit fully, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The lamp should never be used with an extension cord unless the plug can be fully inserted into it. Users are explicitly warned not to attempt to disregard this safety feature.
  • Bulb Compatibility: The lamp is versatile in its bulb compatibility, supporting incandescent (Type "A"), CFL, and LED bulbs within specified wattage limits. The inclusion of a 4-watt LED bulb in the box provides an immediate, energy-efficient lighting solution.

Maintenance Features:

  • Cleaning:
    • Before any cleaning, lamps must be unplugged from the power source.
    • Shades can be dusted using a feather duster or an appropriate vacuum-brush attachment.
    • Lamp bases should be cleaned with a soft, dry cloth. The cleaning method for the base should be appropriate to its material.
    • Users are advised to avoid using chemicals and household cleaners, as these can damage the lamp's finish.
  • Damage Protocol: If the external flexible cable or cord of the lamp becomes damaged, the lamp must be destroyed. This is a crucial safety measure as the cord is not replaceable, and a damaged cord can pose significant electrical hazards.
  • Pre-Installation Inspection: A thorough inspection of the item for any damage or obvious defects is required before attempting installation. If any such issues are found, the item should not be installed. This proactive measure helps prevent potential problems and ensures the safe operation of the lamp.

JONATHAN Y JYL1044A Specifications

General IconGeneral
BrandJONATHAN Y
ModelJYL1044A
CategoryLighting Equipment
LanguageEnglish

Related product manuals