JONATHAN Y JYL1026A - User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
1/2
Model# JYL1026A
Product Dimensions: 10"L X 10"W X 20.5"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft, dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
Harp
1X
D
H
arp
1X
1/2

Summary

General Safety Warnings

Electrical Installation Recommendation

Installation by a licensed electrician is recommended. Switch off main electrical supply before installation.

Pre-Installation Inspection and Returns

Inspect for damage before installation. Items installed with defects cannot be returned.

Care and Maintenance

Cleaning Instructions

Unplug lamps before cleaning. Use feather duster or vacuum for shades. Wipe bases with soft, dry cloth.

Chemical Usage Advisory

Avoid chemicals and household cleaners, as they may damage the finish.

Important Safety Instructions

Assembly Preparation

Ensure all parts are present before assembly. Assemble on a soft surface to prevent scratches.

Cord Safety

The external flexible cable cannot be replaced. If damaged, the luminaire must be destroyed.

Polarized Plug Safety

Use polarized plug in polarized outlet only. Do not defeat this safety feature.

Part List and Hardware

Preparation and Bulb Requirements

Parts Check and Assembly Time

Verify all parts against lists before assembly. Estimated Assembly Time is 6 minutes.

Bulb Type and Wattage Guidelines

Use 'A' bulb max 40W, CFL max 13W, or LED max 9W. An LED 4W bulb is included.

Assembly Instructions

Step 1: Shade Assembly

Insert Harp into Saddle, place Shade on Harp, and tighten Finial.

Step 2: Bulb Installation

Insert the bulb into the socket.

Step 3: Stability Check

Place the light on a level surface to check for stability.

JONATHAN Y JYL1026A Specifications

General

Brand	JONATHAN Y
Model	JYL1026A
Category	Lighting Equipment
Language	English