JONATHAN Y JYL4008A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE O

Model# JYL4008A

Product Dimensions: 16"Lx16 "W x27 "H

INSPECT

ITEM

CAREFULLY

BEFORE

ATTEMPTING

INSTALL

THERE

ANY

DAMAGE

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material Avoid the use of chemicals and household cleaners as they may damage the finish

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To red ce the risk of fire electrical shock or inj r to persons or propert please follo the g ideline belo

e ma

e use o

s an

ouse

eaners as

ey may

amage

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

o re

uce t

e r

re, e

ectr

ury to persons or property, p

ease

ow t

e gu

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plu

(

one blade is wider than the other

)

as a safet

feature to reduce

ppppg( )y

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTIT

PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL4008A and is the answer not in the manual?

Summary

Product Safety Information

Installation Warnings

Critical warnings for safe installation, including the need for a licensed electrician and power disconnection.

Care and Maintenance

Instructions on how to clean and maintain the lamp safely without damaging its finish.

Usage Safety Precautions

Important safety guidelines for using the lamp, covering parts, assembly, and electrical safety features.

Assembly Instructions

Preparation and Assembly Steps

Guidance on preparing for assembly and step-by-step instructions for putting the lamp together.

Summary

Product Safety Information

Installation Warnings

Critical warnings for safe installation, including the need for a licensed electrician and power disconnection.

Care and Maintenance

Instructions on how to clean and maintain the lamp safely without damaging its finish.

Usage Safety Precautions

Important safety guidelines for using the lamp, covering parts, assembly, and electrical safety features.

Assembly Instructions

Preparation and Assembly Steps

Guidance on preparing for assembly and step-by-step instructions for putting the lamp together.

This document provides comprehensive instructions for the assembly, use, and maintenance of a portable lamp, emphasizing safety and proper handling. It is designed to guide users through the entire process, from initial setup to ongoing care, ensuring a safe and functional lighting experience.

Function Description

The device is a portable lamp designed to provide illumination in various indoor settings. It consists of several interconnected components that, when assembled, form a complete and functional lighting fixture. The lamp operates by converting electrical energy into light, utilizing a bulb housed within a socket and covered by a shade to diffuse the light. Its primary function is to offer ambient or task lighting, enhancing the aesthetic and practical utility of a room. The lamp is intended for use with specific types of bulbs, ensuring optimal performance and safety.

Usage Features

The lamp is designed for straightforward assembly and operation, making it accessible for most users.

Assembly: The assembly process involves connecting the lamp's main structural components. Users begin by attaching the "Neck" (B) to the "Lamp base" (A), ensuring the power cord is not twisted and the connection is secure. Following this, the "Harp" (E) is inserted into the "Saddle" (C). The "Shade" (F) is then placed onto the "Harp" (E), and the "Finial" (G) is tightened onto the "Harp" (E) to secure the shade. Finally, the "Bulb" (H) is inserted into the "Socket" (D). The instructions emphasize performing assembly on a soft surface to prevent scratching the finish.
Power Cord and Plug: The lamp is equipped with a power cord and a polarized plug, a crucial safety feature. A polarized plug has one blade wider than the other, designed to fit into a polarized outlet in only one orientation. This design helps reduce the risk of electric shock. Users are instructed to ensure the plug fits fully into the outlet; if it doesn't, they should reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. The use of extension cords is permitted only if the plug can be fully inserted into the extension cord. Users are explicitly warned against attempting to defeat this safety feature.
Bulb Compatibility: The lamp is designed to accommodate specific bulb types and wattages to ensure safe and efficient operation. It can use an ON/OFF Type "A" bulb with a maximum of 100 watts, a CFL bulb with a maximum of 23 watts, or an LED bulb with a maximum of 12 watts. The product typically includes an LED 9-watt bulb, providing an immediate lighting solution upon assembly. Adhering to these specifications is vital for preventing overheating and potential damage to the lamp or electrical system.
Stability Check: After assembly, users are advised to place the lamp on a level surface to verify its stability. This step ensures that all components are correctly connected and the lamp stands securely, minimizing the risk of tipping over.
Intended Use: The lamp is intended for indoor use only. Its design and electrical components are not suitable for outdoor environments or areas exposed to moisture, which could pose electrical hazards.

Maintenance Features

Proper maintenance is crucial for preserving the lamp's appearance, functionality, and safety over time. The instructions provide clear guidelines for cleaning and general care.

Cleaning: Before any cleaning, the lamp must be unplugged from the electrical outlet to prevent electric shock. For dusting the shades, a feather duster or a vacuum-brush attachment is recommended. The lamp bases should be cleaned with a soft, dry cloth, using methods appropriate for the material of the base.
Avoid Harsh Chemicals: Users are explicitly warned against using chemicals and household cleaners on the lamp. Such products can damage the finish of the lamp, leading to discoloration, corrosion, or other forms of deterioration. Gentle cleaning methods are preferred to maintain the lamp's aesthetic integrity.
Cord Integrity: The external flexible cable or cord of the luminaire cannot be replaced. If the cord becomes damaged, the entire luminaire must be destroyed. This is a critical safety instruction, as a damaged cord can pose a significant risk of electric shock or fire. Users should regularly inspect the cord for any signs of wear, fraying, or damage.
Pre-Installation Inspection: Before attempting to install the lamp, users are instructed to inspect the item carefully. If any damage or obvious defects are found, the lamp should not be installed. The document states that the item may not be returned once it has been installed, underscoring the importance of this initial inspection. This ensures that only products in perfect condition are put into service, preventing potential safety issues or functional problems.
Professional Installation Recommendation: While the lamp is designed for user assembly, the document strongly recommends that installation be performed by a licensed electrician. This recommendation highlights the electrical nature of the product and the potential risks associated with improper handling of electrical components, especially concerning the main electrical supply.
Electrical Safety Precautions: A critical safety warning advises users to switch off the main electrical supply from the main fuse box/circuit breaker before installation. This step is fundamental to preventing electric shock during the assembly and connection process. It underscores the importance of disconnecting power to the circuit where the lamp will be installed.
Part Verification: Before beginning assembly, users are instructed to ensure that all parts indicated in the parts list and hardware list are present. If any part is missing or damaged, assembly should not be attempted. This ensures that the lamp is assembled correctly with all necessary components, preventing incomplete or unstable setups.

By adhering to these detailed instructions, users can ensure the safe and effective operation of their portable lamp, extending its lifespan and maintaining its aesthetic appeal.

JONATHAN Y JYL4008A Specifications

General

Style	Modern
Material	Metal
Shade Material	Fabric
Bulb Base	E26
Base Material	Metal
Product Type	Table Lamp
Bulb Type	Incandescent
Bulb Included	No
Category	Lighting
Number of Lights	1