JONATHAN Y JYL6107A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A Lamp base 1X D Harp 1X
B Lamp Body 1X E Bulb 1X
Model# JYL6107A
Product Dimensions: D14.2"W X 60"H
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
C
shade
1X
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed

JONATHAN Y JYL6107A Specifications

General

Brand	JONATHAN Y
Model	JYL6107A
Category	Lighting Equipment
Language	English

Summary

General Warnings and Safety

Product Inspection Warning

Inspect the item carefully before installation. Do not install if damaged or defective.

Care and Maintenance Instructions

Cleaning Procedures

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum-brush.

Material Care Guidelines

Wipe lamp bases with a soft, dry cloth; avoid chemicals that may damage the finish.

Important Safety Instructions

Assembly Preparation

Ensure all parts are present and assemble on a soft surface to prevent scratching.

Electrical Safety & Cord

Reduce risk of shock/injury. The external cord cannot be replaced; if damaged, the lamp is destroyed.

Polarized Plug Usage

Use the polarized plug correctly for safety; do not use extension cords unless plug fits fully.

Product Assembly Preparation

Part Verification

Before assembly, ensure all parts are present and compare with the package contents list.

Assembly Steps

Guidance on aligning parts, screwing lamp bodies, and tightening connections carefully.

Bulb and Shade Installation

Instructions for attaching the lampshade, securing it with a ring, and inserting the bulb.

Final Stability Check

Place the light on a level surface and check for stability after assembly.