JONATHAN Y JYL6113A User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
Model# JYL6113A
Product Dimensions: 12"Lx9.75"Wx 56"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X D Flat washer 1X
B Lamp body 1X
E Tooth washer 1X
F Hexagon Nut 1X
C Bulb 1X G Wrench 1X
-4105/2

JONATHAN Y JYL6113A Specifications

General

Brand	JONATHAN Y
Model	JYL6113A
Category	Lighting Equipment
Language	English

Summary

Product Warnings and Care

General Warnings

Inspect item carefully before installation. Do not install if damaged or defective. Item cannot be returned once installed.

Care and Maintenance

Unplug before cleaning. Dust with feather duster or vacuum. Wipe bases with a soft, dry cloth. Avoid chemicals.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface. Follow guidelines for safe use and installation.

Assembly Instructions

Preparation

Verify all parts are present and undamaged before assembly. Use specified bulb types and wattages.

Step 1 Assembly

Align and screw lamp body sections together, attach base, washers, and nut securely with wrench.

Step 2 Bulb Installation

Insert the bulb into the lamp body and tighten securely, ensuring the power cord is not twisted.

Step 3 Stability Check

Place the lamp on a level surface and check for stability after assembly.