JONATHAN Y JYL1024A - Product Assembly; Preparation and Parts Check; Assembly Steps

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
2/2
gg yp p p pp pg
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT BULB IN THE BO
X
THERE
IS
LED
4 WATT
BULB
IN
THE
BOX
11
12
3
11
12
3
Step 1 Step2 Step3
Insert the Har
p
(
D
)
into the Saddle
(
B
)
. Insert the bulb
(
G
)
into the socket
(
C
)
. Put the li
g
ht on a level surface to check
Insert
the
Harp
(D)
into
the
Saddle
(B).
Insert
the
bulb(G)
into
the
socket(C).
Put
the
light
on
a
level
surface
to
check
Put the shade(E) on the Harp(D), then if everything is stable.
tighten the Finial (F)into the Harp (D)
ENJOY YOUR LAMP
ENJOY
YOUR
LAMP
2/2