JONATHAN Y JYL1022A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
1/2
Model# JYL1022A
Product Dimensions: 10"L X 10"W X 15.5"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft
,
dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
*
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
H
1X
D Harp 1X
1/2

JONATHAN Y JYL1022A Specifications

General

Brand	JONATHAN Y
Model	JYL1022A
Category	Home Lighting
Type	Table Lamp
Base Material	Metal
Material	Metal
Color	Silver
Shade Material	Fabric
Shade Color	White
Bulb Type	LED
Bulb Included	Yes
Switch Type	Rotary
Number of Bulbs	1
Number of Lights	1
Wattage	60 W
Voltage	120V
Height	24 inches
Width	12 inches
Length	12 inches
Dimensions	24 x 12 x 12 inches

Summary

General Warnings and Safety

Electrical Installation Recommendation

Recommends installation by a licensed electrician and switching off power before starting.

Pre-Installation Inspection

Inspect item carefully for damage or defects before installation; do not install if damaged.

Care and Maintenance Instructions

Cleaning Procedures

Unplug before cleaning; use feather duster or vacuum attachment for shades, soft cloth for bases.

Chemical Usage Advisory

Avoid chemicals and household cleaners to prevent damage to the fixture's finish.

Important Safety and Assembly Notices

Assembly Preparation Guidelines

Ensure all parts are present and assemble on a soft surface to prevent scratches.

Risk Reduction for Use and Installation

Follow guidelines to reduce risk of fire, electrical shock, or injury to persons or property.

Cord Damage Policy

The external flexible cable cannot be replaced; if damaged, the luminaire must be destroyed.

Polarized Plug Safety Feature

Polarized plug reduces shock risk; ensure full insertion, do not use with extension cords.

Part and Hardware List

Assembly Instructions

Preparation and Part Check

Before assembly, verify all parts against package and hardware lists; do not assemble if parts are missing.

Bulb Type Recommendation

Use Type "A" bulb max 40W, CFL max 13W, or LED max 9W; LED 4W bulb included.

Step 1: Harp and Shade Assembly

Insert Harp into Saddle, place Shade on Harp, then tighten Finial onto Harp.

Step 2: Bulb Installation

Insert the bulb into the socket.

Step 3: Stability Check

Place the light on a level surface to check if everything is stable.