JONATHAN Y JYL1038A - User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL1038A
Product Dimensions: 10"Lx 10"W x 20"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X

Summary

Care and Maintenance

Important Safety Instructions

Part List and Hardware List

Preparation and Assembly

Step 1: Connect Neck to Base

Connect the Neck (B) to the Base (A) and screw securely, avoiding twisting the power cord.

Step 2: Assemble Shade and Bulb

Insert Harp (E) into Saddle (C), place Shade (F) on Harp (E), tighten Finial (G), and insert Bulb (H).

Step 3: Stability Check

Place the lamp on a level surface to verify its stability after assembly.

JONATHAN Y JYL1038A Specifications

General

Product Name	JONATHAN Y JYL1038A
Category	Home Lighting
Product Type	Table Lamp
Style	Modern
Base Material	Metal
Shade Material	Fabric
Bulb Included	Yes
Bulb Type	LED
Wattage	9W
Switch Type	On/Off
Number of Lights	1