JONATHAN Y JYL2003A - User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
i
BREAKER
BEFORE
INSTALLATION
.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
CARE AND MAINTENANCE
Model# JYL2003A
Product Dimensions: 16"Lx 16"W x 25"H
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that
y
ou have all
p
arts indicated before
y
ou be
g
in assembl
y
of this item
P
ro
d
uc
t
Di
mens
i
ons:
16"L
x
16"W
x
25"H
Please
make
sure
that
you
have
all
parts
indicated
before
you
begin
assembly
of
this
item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
If
the
cord
is
damaged
,
the
luminaire
shall
be
destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the
p
lu
g
can be full
y
inserted. do not attem
p
t to defeat this safet
y
feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
Part List and Hardware List
cord
unless
the
plug
can
be
fully
inserted.
do
not
attempt
to
defeat
this
safety
feature.
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D
Socket
1X
H
Blb
1X
D
S
oc
k
e
t
1X
H
B
u
lb
1X

Summary

General Safety and Installation Warnings

Electrical Installation and Inspection

Recommend licensed electrician installation. Switch off power supply before installation and inspect for damage before assembly.

Safe Use and Maintenance Precautions

Unplug before cleaning. Use soft cloths and appropriate methods for lamp bases. Avoid chemicals. Follow guidelines to reduce fire/shock risk.

Important Safety Instructions

Ensure all parts are present, assemble on a soft surface, and do not defeat the polarized plug safety feature.

Assembly Instructions

Preparation and Part Verification

Verify all parts are present before assembly. Use specified bulb types (max 100W incandescent, 23W CFL, or 12W LED).

Step 1: Connecting Lamp Components

Connect the Neck (B) to the Lamp Base (A), ensuring the power cord is not twisted and is tightened securely.

Step 2: Attaching Shade and Bulb

Insert Harp (E) into Saddle (C), attach Shade (F), secure with Finial (G), and insert Bulb (H) into Socket (D).

Step 3: Final Stability Check

Place the assembled lamp on a level surface to check if everything is stable.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document outlines the assembly, usage, and maintenance instructions for a portable lamp. It emphasizes safety precautions and proper installation procedures to ensure the longevity and safe operation of the lighting fixture.

Function Description

This device is a portable lamp designed to provide illumination. It features a standard socket for a bulb, a harp to support a lampshade, and a finial to secure the shade. The lamp is designed for indoor use and operates via a polarized plug, which is a safety feature to reduce the risk of electric shock. The lamp's design allows for easy assembly and placement on a level surface.

Usage Features

The lamp is designed for straightforward operation and assembly. Before beginning assembly, users are instructed to ensure all parts are present and undamaged. The assembly process is estimated to take approximately 6 minutes and should be performed on a soft surface to prevent scratching the finish.

The assembly involves three main steps:

1. Connecting the Neck to the Base: The power cord is pulled through to connect the neck (B) to the lamp base (A), and the neck is then screwed onto the base. Users are advised to be careful not to twist the power cord and to tighten securely.
2. Assembling the Harp, Shade, and Finial: The harp (E) is inserted into the saddle (C). The shade (F) is placed onto the harp (E), and then the finial (G) is tightened into the harp (E) to secure the shade. Finally, the bulb (H) is inserted into the socket (D).
3. Final Check: After assembly, the lamp should be placed on a level surface to ensure everything is stable before use.

The lamp is designed to accommodate specific bulb types to ensure safe and efficient operation. Users are instructed to use an ON/OFF Type "A" bulb with a maximum of 100 watts, a CFL bulb with a maximum of 23 watts, or an LED bulb with a maximum of 12 watts. The lamp typically includes a 9-watt LED bulb in the box.

A key safety feature of this portable lamp is its polarized plug, which has one blade wider than the other. This design is intended to reduce the risk of electric shock. The plug will fit into a polarized outlet only one way. If the plug does not fit fully, users should reverse the plug. If it still does not fit, a qualified electrician should be contacted. It is explicitly stated that users should never use an extension cord unless the plug can be fully inserted and should not attempt to defeat this safety feature.

Maintenance Features

Proper care and maintenance are crucial for preserving the lamp's appearance and functionality. Users are advised to unplug the lamp before using any cleaning solutions.

For cleaning the shades, a feather duster or an appropriate vacuum-brush attachment can be used. Lamp bases should be cleaned with a soft, dry cloth, using methods appropriate to the material of the base. It is important to avoid the use of chemicals and household cleaners, as these can damage the finish of the lamp.

The document also includes important safety instructions regarding the lamp's electrical components. It states that the external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed to prevent potential hazards.

Installation of this lighting fixture is recommended to be performed by a licensed electrician. Before installation, users are warned to switch off the main electrical supply from the main fuse box/circuit breaker. It is also advised to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, the item should not be installed, as it may not be returned once it has been installed. This emphasizes the importance of a thorough pre-installation check to ensure safety and proper functioning.

JONATHAN Y JYL2003A Specifications

General

Product Name	JONATHAN Y JYL2003A
Category	Outdoor Light
Type	Wall Light
Material	Metal
Finish	Black
Bulb Type	LED
Style	Modern
Number of Lights	1
Voltage	120V
Lumens	800
Color Temperature	3000K
IP Rating	IP65