JONATHAN Y JYL2046A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE

QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model# JYL2046A

Product Dimensions: 14"Lx 14"W x 26"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

Need help?

Do you have a question about the JONATHAN Y JYL2046A and is the answer not in the manual?

Summary

WARNING

Electrical Installation Safety

Requires installation by a licensed electrician and switching off main electrical supply before installation.

Pre-Installation Inspection

Inspect the item carefully for damage or defects before installation. Do not install if damaged.

CARE AND MAINTENANCE

Cleaning and Care Guidelines

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum brush. Clean bases appropriately.

NOTICE & IMPORTANT SAFETY INSTRUCTIONS

Assembly Safety Precautions

Ensure all parts are present, assemble on a soft surface, and follow safety guidelines for use and installation.

Cord Safety and Integrity

The external flexible cable cannot be replaced; if damaged, the luminaire shall be destroyed.

Polarized Plug Usage

The polarized plug fits only one way into an outlet. Do not defeat this safety feature.

PRODUCT ASSEMBLY

Bulb Compatibility Information

Use Type 'A' bulb max 100W, CFL max 23W, or LED max 12W. A 9W LED bulb is included.

Step 1: Connect Neck to Base

Connect the Neck (B) to the Lamp Base (A), ensuring the power cord is not twisted.

Step 2: Attach Harp, Shade, and Bulb

Insert Harp (E) into Saddle (C), place Shade (F) on Harp, tighten Finial (G), and insert Bulb (H).

Step 3: Final Stability Check

Place the lamp on a level surface to check if everything is stable after assembly.

Summary

WARNING

Electrical Installation Safety

Requires installation by a licensed electrician and switching off main electrical supply before installation.

Pre-Installation Inspection

Inspect the item carefully for damage or defects before installation. Do not install if damaged.

CARE AND MAINTENANCE

Cleaning and Care Guidelines

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum brush. Clean bases appropriately.

NOTICE & IMPORTANT SAFETY INSTRUCTIONS

Assembly Safety Precautions

Ensure all parts are present, assemble on a soft surface, and follow safety guidelines for use and installation.

Cord Safety and Integrity

The external flexible cable cannot be replaced; if damaged, the luminaire shall be destroyed.

Polarized Plug Usage

The polarized plug fits only one way into an outlet. Do not defeat this safety feature.

PRODUCT ASSEMBLY

Bulb Compatibility Information

Use Type 'A' bulb max 100W, CFL max 23W, or LED max 12W. A 9W LED bulb is included.

Step 1: Connect Neck to Base

Connect the Neck (B) to the Lamp Base (A), ensuring the power cord is not twisted.

Step 2: Attach Harp, Shade, and Bulb

Insert Harp (E) into Saddle (C), place Shade (F) on Harp, tighten Finial (G), and insert Bulb (H).

Step 3: Final Stability Check

Place the lamp on a level surface to check if everything is stable after assembly.

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Important Safety Instructions and Warnings

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL2046A lamp.

Function Description:

The JYL2046A is a portable electric lamp designed to provide illumination. It consists of a lamp base, neck, saddle, socket, harp, shade, finial, and a bulb. The lamp is intended for indoor use and operates by converting electrical energy into light. It features a polarized plug as a safety mechanism to reduce the risk of electric shock.

Important Technical Specifications:

Model Number: JYL2046A
Product Dimensions: 14"L x 14"W x 26"H
Bulb Type: ON/OFF Type "A" bulb
Maximum Wattage (Incandescent): 100-watt
Maximum Wattage (CFL): 23-watt
Maximum Wattage (LED): 12-watt
Included Bulb: LED 9-watt bulb
Power Connection: Polarized plug (one blade wider than the other)
Electrical Safety: Requires installation by a licensed electrician. Main electrical supply must be switched off before installation.

Usage Features:

Assembly: The lamp requires assembly, which is estimated to take 6 minutes. The assembly process involves connecting the neck to the lamp base, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
Bulb Compatibility: The lamp is compatible with Type "A" bulbs, allowing for flexibility in light output using incandescent, CFL, or LED bulbs within specified wattage limits. A 9-watt LED bulb is included.
Polarized Plug: The lamp is equipped with a polarized plug, a safety feature designed to ensure correct electrical connection and reduce the risk of electric shock. Users are instructed to ensure the plug fits fully into the outlet and to reverse it if it doesn't. If it still doesn't fit, a qualified electrician should be contacted. The use of extension cords is permitted only if the plug can be fully inserted.
Stability Check: After assembly, users are advised to place the lamp on a level surface to check for stability.

Maintenance Features:

Cleaning:
- Always unplug the lamp before cleaning.
- Shades should be dusted with a feather duster or an appropriate vacuum-brush attachment.
- Lamp bases should be wiped with a soft, dry cloth.
- Cleaning methods for the lamp base should be appropriate to the material.
Chemical Avoidance: Avoid using chemicals and household cleaners, as they may damage the finish of the lamp.
Cord Integrity: The external flexible cable or cord of the luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.

Important Safety Instructions and Warnings:

Professional Installation: Installation should be performed by a licensed electrician.
Power Disconnection: Always switch off the main electrical supply from the main fuse box/circuit breaker before installation.
Pre-Installation Inspection: Carefully inspect the item for any damage or obvious defects before attempting to install. Do not install if damaged, as the item may not be returned once installed.
Parts Verification: Before assembly, ensure all parts indicated in the part list and hardware list are present. Do not attempt to assemble if any part is missing or damaged.
Assembly Surface: Assemble the item on a soft surface to prevent scratching the finish.
Electrical Shock/Fire Prevention: Follow all guidelines for safe use and installation to reduce the risk of fire, electrical shock, or injury.
Cord Management: Be careful not to twist the power cord during assembly and ensure it is tightened securely.
Polarized Plug Safety: Do not attempt to defeat the safety feature of the polarized plug. If the plug does not fit fully into an outlet, reverse it. If it still does not fit, consult a qualified electrician. Only use extension cords if the plug can be fully inserted.