JONATHAN Y JYL2069A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL2069A

Product Dimensions: 15"Lx 15"W x 30"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an

extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A.B.C.D Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL2069A and is the answer not in the manual?

Summary

Preparation and Assembly

Assembly Step 1

Connect the Neck to the Base and tighten securely. Ensure the power cord is not twisted.

Assembly Step 2

Attach the Harp with the Shade and Finial, then insert the Bulb into the socket.

Assembly Step 3

Place the lamp on a level surface to check for stability.

Summary

Preparation and Assembly

Assembly Step 1

Connect the Neck to the Base and tighten securely. Ensure the power cord is not twisted.

Assembly Step 2

Attach the Harp with the Shade and Finial, then insert the Bulb into the socket.

Assembly Step 3

Place the lamp on a level surface to check for stability.

This document provides instructions for the assembly, care, and maintenance of the JONATHAN Y Model# JYL2069A lamp.

Function Description:

The JYL2069A is a portable lamp designed to provide illumination. It features a traditional design with a lamp base, neck, saddle, socket, harp, shade, finial, and bulb. The lamp operates with an on/off switch and is designed for indoor use. Its primary function is to offer ambient or task lighting in a room, with a focus on ease of assembly and safe operation.

Important Technical Specifications:

Model Number: JYL2069A
Product Dimensions: 15"L x 15"W x 30"H
Bulb Type: The lamp is designed to use an ON/OFF Type "A" bulb.
Maximum Wattage:
- Incandescent Bulb: Max 100-watt
- CFL Bulb: Max 23-watt
- LED Bulb: Max 12-watt
Included Bulb: The lamp comes with an LED 9-watt bulb in the box.
Plug Type: The lamp features a polarized plug (one blade wider than the other) as a safety feature to reduce the risk of electric shock. This plug is designed to fit into a polarized outlet only one way.
Cord: The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp must be destroyed.
Assembly Time: Estimated assembly time is 6 minutes.

Usage Features:

Assembly Process: The lamp is designed for straightforward assembly in three main steps:
1. Connecting the Neck to the Base: Pull the power cord to connect the Neck (B) to the Lamp base (A), then screw the Neck (B) onto the Lamp base (A). Care should be taken not to twist the power cord and to tighten securely.
2. Assembling the Shade and Bulb: Insert the Harp (E) into the Saddle (C). Place the Shade (F) onto the Harp (E), then tighten the Finial (G) onto the Harp (E). Finally, insert the Bulb (H) into the Socket (D).
3. Placement and Stability Check: After assembly, the lamp should be placed on a level surface to ensure stability before use.
Safety Features:
- Polarized Plug: The polarized plug is a critical safety feature. Users are instructed to ensure the plug fits fully into a polarized outlet. If it does not fit initially, the plug should be reversed. If it still does not fit, a qualified electrician should be contacted. The use of an extension cord is only permitted if the plug can be fully inserted into the extension cord. Users are explicitly warned not to attempt to disregard this safety feature.
- Damaged Cord: In case of a damaged cord, the lamp must be destroyed, as the cord is not replaceable.
- Pre-assembly Inspection: Users are advised to inspect all parts carefully before attempting to install. If any damage or obvious defect is found, the item should not be installed. Once installed, the item cannot be returned.
- Soft Surface Assembly: Assembly should be performed on a soft surface to prevent scratching the finish.
Bulb Compatibility: The lamp supports various bulb types and wattages, providing flexibility for different lighting preferences, although an LED 9-watt bulb is included.

Maintenance Features:

Cleaning Lamps: Before using any cleaning solutions, lamps should be unplugged.
Cleaning Shades: Lamp shades can be dusted with a feather duster or with an appropriate vacuum-brush attachment.
Cleaning Lamp Bases: Lamp bases should be wiped with a soft, dry cloth. The cleaning method for the base should be appropriate to its material.
Chemical Avoidance: Users are warned to avoid the use of chemicals and household cleaners, as they may damage the lamp's finish.
General Care: Regular dusting and gentle cleaning are recommended to maintain the lamp's appearance and functionality.