JONATHAN Y JYL2053A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft
,
dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
Model# JYL2053A
Product Dimensions: 14"Lx 14"W x 25.5"H
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
*
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTIT
Y
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
H
1X
D Harp 1X

JONATHAN Y JYL2053A Specifications

General

Brand	JONATHAN Y
Model	JYL2053A
Category	Outdoor Light
Language	English

Summary

General Warnings and Safety Instructions

Electrical Installation Safety

Recommendations for installation by a licensed electrician and switching off power before work.

Item Inspection and Handling

Instructions to inspect for damage before installation and not return if installed.

Important Safety Guidelines

Ensure all parts are present, assemble on a soft surface, and follow safety rules.

Cord Replacement and Damage Policy

The external flexible cable cannot be replaced; if damaged, the luminaire must be destroyed.

Polarized Plug Safety Feature

Explanation of the polarized plug for shock risk reduction and proper outlet use.

Care and Maintenance

Lamp Cleaning Procedures

Unplug lamps before cleaning, dust shades with a feather duster or vacuum attachment.

Cleaning Lamp Bases

Wipe with a soft, dry cloth and use methods appropriate to the material, avoid chemicals.

Part List and Hardware

Assembly Preparation and Steps

Pre-Assembly Checks

Verify all parts are present and compare with package contents list before assembly.

Bulb Type Recommendation

Use specific bulb types and wattages: 'A' 100W, CFL 23W, or LED 12W.

Step 1: Shade and Harp Assembly

Insert Harp into Saddle, place shade on Harp, and tighten Finial.

Step 2: Bulb Installation

Insert the bulb into the socket.

Step 3: Stability Check

Place the light on a level surface to ensure stability.