JONATHAN Y JYL2018A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR

INSPECT

ITEM

CAREFULLY

BEFORE

ATTEMPTING

INSTALL

THERE

ANY

DAMAGE

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wi

e with a soft

cloth and clean lam

bases with the methods a

riate to

Model# JYL2018A

Product Dimensions: 15"Lx 15"W x 28"H

vacuum brush

attachment.

Wipe

with

soft,

dry

cloth

and

clean

lamp

bases

with

the

methods

appropriate

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

This item should be assembled on a soft surface to prevent scratching the finish during assembly

This

item

should

assembled

soft

surface

prevent

scratching

the

finish

during

assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

PIECE DESCRIPTION PICTURE QUANTIT

Part List and Hardware List

A Lamp base 1X D Shade 1X

Tube

Finial

Tube

Finial

F Socket 1X G Bulb 2X

Need help?

Do you have a question about the JONATHAN Y JYL2018A and is the answer not in the manual?

Summary

Preparation and Assembly

Assembly Step 1

Insert tube into screw, place shade on tube, tighten finial. Ensure proper fit.

Assembly Step 2

Insert the bulb into the socket. Ensure it is securely fitted.

Assembly Step 3

Place the lamp on a level surface and check for stability before use.

Summary

Preparation and Assembly

Assembly Step 1

Insert tube into screw, place shade on tube, tighten finial. Ensure proper fit.

Assembly Step 2

Insert the bulb into the socket. Ensure it is securely fitted.

Assembly Step 3

Place the lamp on a level surface and check for stability before use.

This document outlines the assembly, usage, and maintenance of a portable lamp, emphasizing safety and proper installation.

Function Description

This device is a portable lamp designed to provide illumination. It utilizes an ON/OFF type "A" bulb with a maximum wattage of 40-watts, or a CFL bulb with a maximum of 13-watts, or an LED bulb with a maximum of 9-watts. The package includes two 4-watt LED bulbs. The lamp features a polarized plug as a safety feature to reduce the risk of electric shock, meaning one blade of the plug is wider than the other. This design ensures the plug fits into a polarized outlet only one way.

Usage Features

Before assembly, it is crucial to ensure all parts are present and undamaged. Any missing or damaged parts should prevent assembly, and the item should not be returned once installed. The estimated assembly time is approximately 6 minutes.

The assembly process is straightforward:

Step 1: Insert the tube (C) into the screw (B) on the lamp base (A). Place the shade (D) onto the tube (C). Finally, tighten the finial (E) onto the tube (C) to secure the shade.
Step 2: Insert the provided bulb(s) (G) into the socket(F). The manual indicates two bulbs are included.
Step 3: Once assembled, place the lamp on a level surface to verify its stability.

For safe operation, the lamp must be installed by a licensed electrician. Before any installation or maintenance, the main electrical supply to the fuse box/circuit breaker must be switched off. It is critical to inspect the item carefully for any damage or obvious defects before attempting installation. If any such issues are found, the lamp should not be installed.

The polarized plug is a key safety feature. If the plug does not fit fully into an outlet, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into it. Users are explicitly warned against attempting to defeat this safety feature.

The external flexible cable or cord of this luminaire is not replaceable. If the cord becomes damaged, the entire luminaire must be destroyed to prevent hazards. To minimize the risk of fire, electrical shock, or injury, all guidelines for safe use and installation must be followed. Assembly should always be performed on a soft surface to prevent scratching the lamp's finish.

Maintenance Features

Regular care and maintenance are essential to preserve the lamp's appearance and functionality. Before using any cleaning solutions, the lamp should be unplugged from the power source.

Shades can be dusted using a feather duster or an appropriate vacuum-brush attachment. Lamp bases should be cleaned with a soft, dry cloth, using cleaning methods suitable for the material of the base. It is important to avoid the use of harsh chemicals and household cleaners, as these can damage the lamp's finish.