Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
PREPARATION
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE ARE 2 PCS LED 4-WATT BULB IN THE BOX
11
12
3
Step 1 Step2 Step3
Insert the tube (C) into the Screw (B). Insert the bulb(G) into the socket(F). Put the light on a level surface to check
Put the shade(D) on the tube(C) then
,
.
tighten the Finial (E)into the Tube©.
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
