JONATHAN Y JYL2026A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE

QUANTITY

A Lamp base 1X E Shade 1X

B Saddle 1X F Finial 1X

C Socket 1X G Bulb 1X

D Harp 1X

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model# JYL2026A

Product Dimensions: 9"Lx 9"W x 17"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Part List and Hardware List

Need help?

Do you have a question about the JONATHAN Y JYL2026A and is the answer not in the manual?

Summary

WARNING AND SAFETY INFORMATION

Electrical Installation Warnings

Crucial warnings for licensed electrician installation and switching off power.

Inspection and Return Policy

Instructions to inspect for damage before installation; installed items are non-returnable.

CARE AND MAINTENANCE

Cleaning Instructions

Guidelines for cleaning lamps using feather dusters, soft cloths, and avoiding chemicals.

IMPORTANT SAFETY INSTRUCTIONS

Assembly and Usage Safety

Ensure all parts are present, assemble on a soft surface, and follow safety guidelines.

Cord and Plug Safety

Details on cord replacement prohibition, polarized plug safety, and extension cord use.

PREPARATION AND ASSEMBLY

Parts Verification

Confirm all parts are present before starting assembly; do not assemble if parts are missing.

Bulb Type Recommendation

Use specific bulb types: 'A' bulb max 60W, CFL max 13W, or LED max 9W.

Assembly Steps

Step-by-step guide for assembling the lamp, including harp, shade, finial, and bulb.

Summary

WARNING AND SAFETY INFORMATION

Electrical Installation Warnings

Crucial warnings for licensed electrician installation and switching off power.

Inspection and Return Policy

Instructions to inspect for damage before installation; installed items are non-returnable.

CARE AND MAINTENANCE

Cleaning Instructions

Guidelines for cleaning lamps using feather dusters, soft cloths, and avoiding chemicals.

IMPORTANT SAFETY INSTRUCTIONS

Assembly and Usage Safety

Ensure all parts are present, assemble on a soft surface, and follow safety guidelines.

Cord and Plug Safety

Details on cord replacement prohibition, polarized plug safety, and extension cord use.

PREPARATION AND ASSEMBLY

Parts Verification

Confirm all parts are present before starting assembly; do not assemble if parts are missing.

Bulb Type Recommendation

Use specific bulb types: 'A' bulb max 60W, CFL max 13W, or LED max 9W.

Assembly Steps

Step-by-step guide for assembling the lamp, including harp, shade, finial, and bulb.

This document outlines the assembly, usage, and maintenance of a portable lamp. It emphasizes safety precautions and proper installation procedures to ensure the longevity and safe operation of the device.

Function Description

The device is a portable lamp designed to provide illumination. It consists of several interconnected parts: a lamp base, a saddle, a socket, a harp, a shade, a finial, and a bulb. The lamp is intended for indoor use and operates by converting electrical energy into light. Its design incorporates a polarized plug as a safety feature to reduce the risk of electric shock, ensuring it can only be inserted into a polarized outlet in one specific orientation. The lamp is designed to accommodate various bulb types, specifically "A" type bulbs with a maximum of 60 watts, CFL bulbs with a maximum of 13 watts, or LED bulbs with a maximum of 9 watts. A 9-watt LED bulb is included with the product.

Usage Features

The assembly process for the lamp is straightforward and is estimated to take approximately 6 minutes. Before beginning assembly, users are instructed to ensure all parts are present and undamaged. Assembly should be performed on a soft surface to prevent scratching the lamp's finish.

The assembly steps are as follows:

Harp and Shade Installation: The harp (D) is inserted into the saddle (B). Following this, the shade (E) is placed onto the harp (D). The finial (F) is then tightened onto the harp (D) to secure the shade in place.
Bulb Installation: The bulb (G) is inserted into the socket (C).
Stability Check: After assembly, the lamp should be placed on a level surface to verify its stability.

For safe operation, it is crucial to follow specific guidelines:

Electrical Safety: The lamp features a polarized plug. If the plug does not fit fully into an outlet, it should be reversed. If it still does not fit, a qualified electrician should be contacted. The lamp should never be used with an extension cord unless the plug can be fully inserted into the extension cord's receptacle. Users are explicitly warned not to attempt to defeat this safety feature.
Bulb Type: Only specific bulb types and wattages should be used: "A" type bulbs (max 60W), CFL bulbs (max 13W), or LED bulbs (max 9W). A 9-watt LED bulb is provided with the lamp.
Cord Damage: The external flexible cable or cord of the luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed to prevent hazards.
Installation Environment: The lamp should be installed in an environment where it is not exposed to excessive moisture or other conditions that could compromise its electrical integrity.

Maintenance Features

Proper care and maintenance are essential for preserving the lamp's appearance and functionality.

Cleaning Preparation: Before using any cleaning solutions, the lamp should be unplugged from the electrical outlet.
Shade Cleaning: Lamp shades can be dusted using a feather duster or an appropriate vacuum-brush attachment. This helps remove loose dust and debris without damaging the shade material.
Base Cleaning: The lamp base should be wiped with a soft, dry cloth. For more thorough cleaning, methods appropriate to the material of the lamp base should be used.
Chemical Avoidance: Users are strongly advised to avoid the use of chemicals and household cleaners, as these can damage the finish of the lamp.
Pre-Installation Inspection: Before attempting to install the lamp, it should be carefully inspected for any damage or obvious defects. If any damage or defect is found, the lamp should not be installed, as it cannot be returned once installed.
Professional Installation Recommendation: While assembly is user-friendly, the document recommends that installation of this lighting fixture be done by a licensed electrician, particularly concerning the main electrical supply.
Power Disconnection: A critical safety instruction before any installation or maintenance is to switch off the main electrical supply from the main fuse box or circuit breaker. This prevents electrical shock during handling.

JONATHAN Y JYL2026A Specifications

General

Model	JYL2026A
Brand	JONATHAN Y
Finish	Black
Bulb Type	LED
Voltage	120V
Style	Modern
Number of Lights	1
Shade Material	Glass
Power Source	Hardwired
Type	Outdoor Light
Material	Metal
Specific Uses	Outdoor
Category	Outdoor Light
Fixture Features	Dusk to Dawn Sensor