JONATHAN Y JYL3012A - Assembly and Usage; Preparation and Bulb Type; Assembly Steps; Final Check

Step 1 Step2
Insert the harp (E) into the saddle (C). Put the light on a level surface to check
Put the shade(F) on the harp(E),then if everything is stable.
tighten the finial (G)into the harp (E)
Insert the bulb(H) into the socket(D).
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX