JONATHAN Y JYL3026A - Preparation and Assembly; Assembly Steps

Step 1 Step2
Insert the harp (D) into the saddle (B). Put the light on a level surface to check
Put the shade(E) on the harp(D),then if everything is stable.
tighten the finial (F)into the harp (D)
Insert the bulb(G) into the socket(C).
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents
list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
ENJOY YOUR LAMP
PREPARATION