JONATHAN Y JYL5033A - User Manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
Model# JYL5033A
Product Dimensions: 18"L X 18"W X 25.5"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug if it still does not fit contact a qualified electrician Never use with an extension cord unless the plug can be
p
l
u
g
,
if
it
s
till
d
oes no
t
fit
, con
t
ac
t
a qua
lifi
e
d
e
l
ec
t
r
i
c
i
an.
N
ever use w
ith
an ex
t
ens
i
on cor
d
un
l
ess
th
e p
l
u
g
can
b
e
fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
C
Socket
1X
G
Bulb
1X
D Harp 1X

Summary

Care and Maintenance

Important Safety Instructions

Assembly Instructions

Step 1: Attach Harp and Shade

Insert the Harp into the Saddle, place the shade on the Harp, and tighten the Finial onto the Harp.

Step 2: Install Bulb

Insert the bulb into the socket.

Step 3: Stability Check

Place the lamp on a level surface to verify its stability.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document provides instructions for the assembly, care, and safe use of a portable lamp, model JYL5033A. The lamp is designed for indoor use and features a polarized plug for enhanced safety.

Function Description:

The JYL5033A is a portable lamp intended to provide illumination. It operates with a bulb, which is housed within a socket and covered by a shade. The lamp is activated via an on/off switch. The design incorporates a harp and finial system to secure the shade in place.

Usage Features:

• Assembly: The lamp requires simple assembly, which is estimated to take approximately 6 minutes. The process involves inserting the harp into the saddle, placing the shade onto the harp, tightening the finial, and then screwing the bulb into the socket. It is recommended to assemble the lamp on a soft surface to prevent scratching the finish.
• Bulb Compatibility: The lamp is designed to accommodate specific bulb types and wattages to ensure safe and optimal performance. It can use an ON/OFF Type "A" bulb with a maximum of 100 watts, a CFL bulb with a maximum of 23 watts, or an LED bulb with a maximum of 12 watts. A 9-watt LED bulb is included in the box. Adhering to these specifications is crucial for preventing fire, electrical shock, or injury.
• Polarized Plug: A key safety feature of this lamp is its polarized plug. This means one blade of the plug is wider than the other, designed to fit into a polarized outlet in only one orientation. This design helps reduce the risk of electric shock. If the plug does not fit fully into the outlet, users are instructed to reverse the plug. If it still does not fit, a qualified electrician should be contacted. The manual explicitly warns against forcing the plug into an outlet or using it with an extension cord unless the plug can be fully inserted, emphasizing that users should not attempt to bypass this safety feature.
• Stability Check: After assembly, users are advised to place the lamp on a level surface to ensure everything is stable before use.

Maintenance Features:

• Cleaning: To maintain the lamp, users should unplug it before any cleaning. Shades can be dusted with a feather duster or a vacuum-brush attachment. Lamp bases should be wiped with a soft, dry cloth, using cleaning methods appropriate for the material of the base.
• Chemical Avoidance: It is important to avoid using chemicals and household cleaners on the lamp, as these can damage the finish.
• Cord Integrity: The external flexible cable or cord of this lamp is not replaceable. If the cord becomes damaged, the lamp must be destroyed to prevent safety hazards.
• Pre-Installation Inspection: Before attempting to install the lamp, users are instructed to carefully inspect the item for any damage or obvious defects. If any damage or defect is found, the item should not be installed and cannot be returned once it has been installed. This pre-installation check is crucial for ensuring the product's integrity and user safety.
• Part Verification: Before beginning assembly, users should ensure all parts indicated in the package contents and hardware lists are present. If any part is missing or damaged, assembly should not be attempted.

JONATHAN Y JYL5033A Specifications