JONATHAN Y JYL5009A - User Manual

To Next Page

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE

QUANTITY

A Lamp base 1X F Shade 1X

B Saddle 1X G Finial 1X

C Socket 1X H Bulb 1X

E Harp 1X

Model# JYL5009A

Product Dimensions: 14"L X 14"W X 30"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Need help?

Do you have a question about the JONATHAN Y JYL5009A and is the answer not in the manual?

Summary

General Warnings and Safety

Pre-Assembly Warning

Inspect item for damage before installation; do not install if defective. Item cannot be returned after installation.

Safety Instructions

Ensure all parts are present, assemble on a soft surface, follow guidelines for safe use, and note cord replacement limitations.

Product Preparation and Assembly

Bulb Usage Guidelines

Use specific bulb types and wattages (A-type, CFL, LED) as recommended for safe operation.

Assembly Steps

Instructions for assembling the harp, shade, finial, bulb, and checking stability.

Summary

General Warnings and Safety

Pre-Assembly Warning

Inspect item for damage before installation; do not install if defective. Item cannot be returned after installation.

Safety Instructions

Ensure all parts are present, assemble on a soft surface, follow guidelines for safe use, and note cord replacement limitations.

Product Preparation and Assembly

Bulb Usage Guidelines

Use specific bulb types and wattages (A-type, CFL, LED) as recommended for safe operation.

Assembly Steps

Instructions for assembling the harp, shade, finial, bulb, and checking stability.

This document outlines the assembly, usage, and maintenance instructions for a portable lamp, Model# JYL5009A, manufactured by JONATHAN Y. The lamp is designed for indoor use and features a classic aesthetic with a focus on ease of assembly and safe operation.

Function Description

The lamp serves as a portable lighting fixture, providing illumination through a replaceable bulb. It is designed to be placed on a level surface, such as a table or desk, to enhance the ambiance and functionality of a room. The lamp operates with an on/off switch, allowing users to easily control the light output. Its construction includes a base for stability, a saddle and harp to support the shade, a socket for the bulb, and a finial to secure the shade in place. The electrical components are designed with safety in mind, featuring a polarized plug to reduce the risk of electric shock.

Usage Features

The assembly process for this lamp is straightforward and estimated to take approximately 6 minutes. Users are advised to ensure all parts are present and undamaged before beginning assembly. The assembly should be performed on a soft surface to prevent scratching the lamp's finish.

The core assembly steps involve:

Attaching the Harp: The harp (E) is inserted into the saddle (C), which is part of the lamp base.
Mounting the Shade: The shade (F) is placed onto the harp (E).
Securing the Shade: The finial (G) is then tightened onto the harp (E) to firmly hold the shade in position.
Installing the Bulb: The bulb (H) is screwed into the socket (C). The lamp is designed to accommodate various bulb types:
- "A" type bulb with a maximum of 100-watt.
- CFL bulb with a maximum of 23-watt.
- LED bulb with a maximum of 12-watt.
- Notably, a 9-watt LED bulb is included in the box, providing an energy-efficient lighting solution right away.
Final Check: After assembly, the lamp should be placed on a level surface to ensure stability before use.

A critical safety feature of this lamp is its polarized plug. One blade of the plug is wider than the other, ensuring it can only be inserted into a polarized outlet in one specific orientation. This design helps to reduce the risk of electric shock. If the plug does not fit fully into the outlet, users are instructed to reverse the plug. If it still does not fit, a qualified electrician should be contacted. The use of an extension cord is only recommended if the plug can be fully inserted into the extension cord's receptacle. Users are explicitly warned against attempting to bypass or disregard this safety feature. The external flexible cable or cord of the lamp is not replaceable; if it becomes damaged, the lamp should be disposed of to prevent hazards.

Maintenance Features

Proper care and maintenance are essential to preserve the lamp's appearance and functionality. Before any cleaning, the lamp should always be unplugged from the electrical outlet to prevent electrical hazards.

Dusting Shades: Lamp shades can be dusted using a feather duster or an appropriate vacuum-brush attachment. This helps to remove accumulated dust without damaging the shade material.
Cleaning Lamp Bases: The lamp base should be cleaned with a soft, dry cloth. The cleaning method should be appropriate for the material of the base to avoid damage.
Avoiding Harsh Cleaners: Users are strongly advised to avoid using chemicals and household cleaners on any part of the lamp. Such products can damage the finish and potentially compromise the integrity of the materials.

Upon receiving the item, users are instructed to inspect it carefully before attempting installation. Any damage or obvious defect should prevent installation, as the item may not be returned once it has been installed. This policy underscores the importance of a thorough initial inspection to ensure the product is in perfect condition before assembly and use.