JONATHAN Y JYL5015A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR

1/2

INSPECT

ITEM

CAREFULLY

BEFORE

ATTEMPTING

INSTALL

THERE

ANY

DAMAGE

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL5015A

Product Dimensions: 14"L X 14"W X 28.5"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wi

e with a soft, dr

cloth and clean lam

bases with the methods a

riate to

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

vacuum brush

attachment.

Wipe

with

soft,

dry

cloth

and

clean

lamp

bases

with

the

methods

appropriate

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

* Please make sure that you have all parts indicated before you begin assembly of this item

This item should be assembled on a soft surface to prevent scratching the finish during assembly

This

item

should

assembled

soft

surface

prevent

scratching

the

finish

during

assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

PIECE DESCRIPTION PICTURE QUANTIT

PIECE DESCRIPTION PICTURE QUANTITY

Part List and Hardware List

A Lamp base 1X E Shade 1X

B Saddle 1X F Finial 1X

C Socket 1X G Bulb 1X

Harp

arp

1/2

Need help?

Do you have a question about the JONATHAN Y JYL5015A and is the answer not in the manual?

Summary

Installation and Safety Warnings

Electrical Installation Safety

Mandates installation by a licensed electrician and switching off main power supply before installation.

Important Safety Instructions

Covers part verification, assembly surface, cord safety, and polarized plug usage for safe operation.

Care and Maintenance

Lamp Cleaning Guidelines

Instructions for cleaning lamp shades and bases, advising against chemical cleaners.

Product Components and Preparation

Part List and Hardware

Lists all included pieces and hardware necessary for assembly.

Assembly Preparation

Guidance on checking parts, comparing with lists, and estimated assembly time.

Assembly Instructions

Step-by-Step Assembly

Detailed steps for assembling the lamp, including attaching the harp, shade, finial, and bulb.

Summary

Installation and Safety Warnings

Electrical Installation Safety

Mandates installation by a licensed electrician and switching off main power supply before installation.

Important Safety Instructions

Covers part verification, assembly surface, cord safety, and polarized plug usage for safe operation.

Care and Maintenance

Lamp Cleaning Guidelines

Instructions for cleaning lamp shades and bases, advising against chemical cleaners.

Product Components and Preparation

Part List and Hardware

Lists all included pieces and hardware necessary for assembly.

Assembly Preparation

Guidance on checking parts, comparing with lists, and estimated assembly time.

Assembly Instructions

Step-by-Step Assembly

Detailed steps for assembling the lamp, including attaching the harp, shade, finial, and bulb.

This document provides instructions for the assembly, use, and maintenance of a portable lamp, model JYL5015A, manufactured by JONATHAN Y. The lamp is designed for indoor use and features a traditional aesthetic with a decorative base and a fabric shade.

Function Description

The primary function of this device is to provide illumination. It operates by converting electrical energy into light, utilizing a bulb that is inserted into a socket. The lamp is designed to be placed on a level surface, such as a table or desk, and is equipped with a power cord and a polarized plug for connection to a standard electrical outlet. The light output can be controlled by an on/off switch, though the specific type of switch (e.g., rotary, push-through) is not detailed in the provided materials. The lamp is intended to be a decorative and functional lighting fixture for various indoor environments.

Usage Features

The lamp is designed for straightforward assembly and use. Users are advised to ensure all parts are present before beginning assembly and to assemble the lamp on a soft surface to prevent scratching the finish. The assembly process involves three main steps:

Harp and Shade Assembly: The harp (D) is inserted into the saddle (B) on the lamp base. The shade (E) is then placed onto the harp, and the finial (F) is tightened onto the harp to secure the shade in place. This design allows for easy removal and replacement of the shade if desired.
Bulb Installation: The bulb (G) is inserted into the socket (C). The manual specifies that the lamp is designed to accommodate an "A" type bulb with a maximum wattage of 100-watt, a CFL bulb with a maximum of 23-watt, or an LED bulb with a maximum of 12-watt. Notably, a 9-watt LED bulb is included in the box, indicating a preference for energy-efficient lighting.
Stability Check: After assembly, the lamp should be placed on a level surface to ensure stability before use.

A key safety feature of this portable lamp is its polarized plug. This plug has one blade wider than the other, designed to fit into a polarized outlet only one way. This feature is intended to reduce the risk of electric shock. If the plug does not fit fully into the outlet, users are instructed to reverse the plug. If it still does not fit, a qualified electrician should be contacted. The manual explicitly warns against attempting to defeat this safety feature and advises against using an extension cord unless the plug can be fully inserted into it.

The lamp's design, with its separate components (base, saddle, socket, harp, shade, finial, bulb), allows for some degree of customization, particularly with the shade, which can be replaced to match different decor styles, provided it is compatible with the harp and finial system.

Maintenance Features

The manual provides clear guidelines for the care and maintenance of the lamp to ensure its longevity and preserve its appearance.

Cleaning: Before cleaning, the lamp should be unplugged from the electrical outlet.
- Shades: Dust shades can be cleaned with a feather duster or an appropriate vacuum-brush attachment. This suggests that the shade material is likely fabric or a similar material that can accumulate dust.
- Lamp Bases: Lamp bases should be cleaned with a soft, dry cloth. The cleaning method should be appropriate to the material of the base, implying that different base materials (e.g., metal, ceramic, resin) may require specific care.
Chemical Avoidance: Users are strongly advised to avoid the use of chemicals and household cleaners, as these may damage the finish of the lamp. This suggests that the finishes used on the lamp components are sensitive to harsh cleaning agents.
Cord Maintenance: The external flexible cable or cord of the luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed. This is a critical safety instruction, as a damaged cord can pose a significant electrical hazard.
Pre-Installation Inspection: Before attempting to install the lamp, users are instructed to inspect the item carefully for any damage or obvious defects. If any damage or defect is found, the lamp should not be installed. The manual states that the item may not be returned once it has been installed, emphasizing the importance of this pre-installation check.

Safety Warnings

The document includes several prominent safety warnings:

Professional Installation: Installation of this lighting fixture is recommended to be done by a licensed electrician. While the assembly instructions appear straightforward for a layperson, this recommendation underscores the importance of proper electrical connection and safety.
Power Disconnection: Before installation, users must switch off the main electrical supply from the main fuse box/circuit breaker. This is a standard and crucial safety measure to prevent electrical shock during installation.
Risk Reduction: To reduce the risk of fire, electrical shock, or injury to persons or property, users are instructed to follow the provided guidelines for safe use and installation.
Damaged Cord: As mentioned under maintenance, a damaged cord necessitates the destruction of the luminaire, as it cannot be replaced.

Overall, the JYL5015A lamp is presented as a user-friendly, decorative lighting solution with clear instructions for safe assembly, operation, and maintenance, emphasizing electrical safety and proper care to maintain its aesthetic and functional integrity.

JONATHAN Y JYL5015A Specifications

General

Product Type	Table Lamp
Brand	JONATHAN Y
Model	JYL5015A
Style	Modern
Material	Metal
Base Material	Metal
Bulb Type	LED
Wattage	9W
Bulb Included	Yes
Number of Lights	1
Shade Diameter	12 inches
Weight	5.5 pounds