JONATHAN Y JYL5012A - User Manual

To Next Page

WARNING

WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.

WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT

BREAKER BEFORE INSTALLATION.

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR

1/2

Model# JYL5012A

Product Dimensions: 15"Lx 15"W x 26"H

CARE AND MAINTENANCE

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wi

e with a soft

cloth and clean lam

bases with the methods a

riate to

INSPECT

ITEM

CAREFULLY

BEFORE

ATTEMPTING

INSTALL

THERE

ANY

DAMAGE

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

This item should be assembled on a soft surface to prevent scratching the finish during assembly

vacuum brush

attachment.

Wipe

with

soft,

dry

cloth

and

clean

lamp

bases

with

the

methods

appropriate

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

This

item

should

assembled

soft

surface

prevent

scratching

the

finish

during

assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced;

If the cord is damaged, the luminaire shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

PIECE DESCRIPTION PICTURE QUANTIT

Part List and Hardware List

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

Skt

Blb

D Socket 1X H Bulb 1X

1/2

Need help?

Do you have a question about the JONATHAN Y JYL5012A and is the answer not in the manual?

Summary

Safety Warnings

Installation Warnings

Critical warnings regarding electrical installation by a licensed electrician and power supply.

Usage and Safety Instructions

Detailed guidelines for safe assembly, use, and electrical shock prevention, including polarized plug information.

Assembly Guide

Assembly Steps

Step-by-step instructions for correctly assembling the lighting fixture from base to bulb.

Summary

Safety Warnings

Installation Warnings

Critical warnings regarding electrical installation by a licensed electrician and power supply.

Usage and Safety Instructions

Detailed guidelines for safe assembly, use, and electrical shock prevention, including polarized plug information.

Assembly Guide

Assembly Steps

Step-by-step instructions for correctly assembling the lighting fixture from base to bulb.

This document provides instructions for the assembly, use, and maintenance of the JONATHAN Y Model# JYL5012A lamp.

Function Description:

The JYL5012A is a portable electric lamp designed to provide illumination. It consists of a lamp base, neck, saddle, socket, harp, shade, finial, and bulb. The lamp operates by connecting to a standard electrical outlet via a polarized plug. The primary function is to hold a light bulb and direct its light through a shade to illuminate a space.

Important Technical Specifications:

Model Number: JYL5012A
Product Dimensions: 15"L x 15"W x 26"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 100-Watt
- CFL Bulb: Maximum 23-Watt
- LED Bulb: Maximum 12-Watt
Included Bulb: A 9-Watt LED bulb is included in the box.
Electrical Safety: Features a polarized plug (one blade wider than the other) to reduce the risk of electric shock. This plug is designed to fit into a polarized outlet in only one way.
Cord: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed.

Usage Features:

Assembly: The lamp requires simple assembly, estimated to take 6 minutes. The process involves connecting the neck to the lamp base, screwing them together, inserting the harp into the saddle, placing the shade on the harp, tightening the finial, and inserting the bulb into the socket.
Power Connection: The lamp connects to a standard electrical outlet. Users are warned to ensure the polarized plug is fully inserted into the outlet. If it doesn't fit initially, reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. Extension cords should only be used if the plug can be fully inserted.
Bulb Installation: The lamp supports various bulb types within specified wattage limits. A 9-watt LED bulb is provided for immediate use.
Stability Check: After assembly, users are instructed to place the light on a level surface to check for stability.

Maintenance Features:

Cleaning:
- Always unplug the lamp before using any cleaning solutions.
- Dust shades with a feather duster or an appropriate vacuum-brush attachment.
- Wipe lamp bases with a soft, dry cloth.
- Avoid using chemicals and household cleaners on lamp bases, as they may damage the finish.
Pre-Installation Inspection: Before attempting to install, inspect the item carefully for any damage or obvious defects. If damage or defects are found, do not install the item. The item cannot be returned once it has been installed.
Electrical Safety:
- Installation should be done by a licensed electrician.
- Always switch off the main electrical supply from the main fuse box/circuit breaker before installation.
- The external flexible cable or cord is not replaceable; a damaged cord necessitates the destruction of the luminaire.
Assembly Surface: Assemble the item on a soft surface to prevent scratching the finish.
Cord Handling: During assembly, be careful not to twist the power cord.
Part Verification: Before beginning assembly, ensure all parts indicated in the part list and hardware list are present. Do not attempt to assemble if any part is missing or damaged.