JONATHAN Y JYL5007A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
1/2
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL5007A
Product Dimensions: 15"L X 15"W X 24"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft, dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
Harp
1X
D
H
arp
1X
1/2

JONATHAN Y JYL5007A Specifications

General

Type	Table Lamp
Style	Modern
Color	Black
Shade Material	Fabric
Base Material	Metal
Width	12 inches
Bulb Type	LED
Number of Lights	1
Power Source	Corded Electric
Switch Type	Rotary
Max Wattage	60 watts

Summary

Safety and Installation Warnings

Electrical Installation Guidelines

Requires installation by a licensed electrician. Switch off main electrical supply before installation.

Pre-Installation Inspection

Inspect for damage or defects before installation. Do not install if damaged. Item is non-returnable once installed.

Care and Maintenance

Cleaning Instructions

Unplug before cleaning. Use feather duster or vacuum brush. Wipe with soft, dry cloth. Avoid chemicals.

Important Safety Instructions

Assembly Precautions

Ensure all parts are present. Assemble on a soft surface to prevent scratching the finish.

General Safety & Cord Policy

Follow guidelines for safe use. External cord cannot be replaced; destroy luminaire if damaged.

Polarized Plug Safety Feature

Polarized plug fits outlet one way to reduce electric shock risk. Do not defeat this feature.

Assembly Steps

Preparation and Part Check

Verify all parts are present before assembly. Estimated assembly time is 6 minutes.

Bulb and Shade Assembly

Insert Harp into Saddle, place shade on Harp, and tighten Finial. Use specified bulb types and wattages.

Final Stability Check

Place the light on a level surface to confirm everything is stable after assembly.