JONATHAN Y JYL5010A - User Manual

Model# JYL5010A
Product Dimensions: 10"Lx 10"W x 25"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
D Socket 1X H Bulb 1X

Summary

Safety and Installation Guidelines

Installation and Electrical Precautions

Guidance on electrical supply, inspection, and electrician recommendation for safe installation.

Product Safety and Usage Notes

Key safety points for assembly, cord, plug, and general product use.

Care and Maintenance

Cleaning and Material Care

Instructions for cleaning lamp shades and bases, avoiding chemicals.

Assembly Instructions

Step 1: Base and Neck Assembly

Connect and secure the power cord, neck, and lamp base.

Step 2: Harp, Shade, and Bulb Installation

Assemble harp, saddle, shade, finial, and insert the bulb.

Step 3: Stability Check

Place the lamp on a level surface to ensure stability.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides comprehensive instructions and specifications for the JONATHAN Y Model# JYL5010A table lamp, covering its assembly, safe operation, and maintenance.

Function Description:

The JYL5010A is a portable table lamp designed to provide illumination in indoor settings. It operates by converting electrical energy into light through a bulb, which is housed within a shade to diffuse the light. The lamp features a polarized plug as a safety mechanism to reduce the risk of electric shock, ensuring it can only be inserted into a polarized outlet in one specific orientation. This design prioritizes user safety by preventing incorrect electrical connections.

Important Technical Specifications:

• Model Number: JYL5010A
• Product Dimensions: 10 inches (Length) x 10 inches (Width) x 25 inches (Height)
• Bulb Type Compatibility:
  • ON/OFF Type "A" Bulb: Maximum 60-watt
  • CFL Bulb: Maximum 13-watt
  • LED Bulb: Maximum 12-watt
• Included Bulb: The lamp comes with a 9-watt LED bulb.
• Electrical Safety Feature: Polarized plug (one blade wider than the other) to prevent electric shock.
• Power Source: Requires connection to a standard electrical outlet.
• Construction Materials: The lamp is composed of several distinct parts:
  • Lamp Base (A): The foundational support of the lamp.
  • Neck (B): Connects the base to the upper lamp components.
  • Saddle (C): A component that supports the harp.
  • Socket (D): The electrical component where the bulb is screwed in.
  • Harp (E): A wire frame that supports the lamp shade.
  • Shade (F): Diffuses the light from the bulb.
  • Finial (G): A decorative cap that secures the shade to the harp.
  • Bulb (H): The light-emitting component.

Usage Features:

• Assembly Required: The lamp requires user assembly, which involves connecting the neck to the base, inserting the harp into the saddle, placing the shade on the harp, securing it with the finial, and finally inserting the bulb into the socket.
• Easy Assembly Process: The assembly guide breaks down the process into three simple steps with clear illustrations, making it straightforward for users to set up the lamp.
  1. Step 1 (Base and Neck Connection): Pull the power cord to connect the Neck (B) to the Base (A), then screw the Neck (B) onto the Lamp base (A). Users are advised to be careful not to twist the power cord and to tighten securely.
  2. Step 2 (Harp, Shade, Finial, and Bulb Installation): Insert the Harp (E) into the Saddle (C). Place the Shade (F) on the Harp (E), then tighten the Finial (G) into the Harp (E). Finally, insert the Bulb (H) into the Socket (D).
  3. Step 3 (Stability Check): After assembly, place the lamp on a level surface to ensure everything is stable.
• Polarized Plug Safety: The lamp is equipped with a polarized plug. If the plug does not fit fully into an outlet, the user should reverse the plug. If it still does not fit, a qualified electrician should be contacted. The manual explicitly warns against using an extension cord unless the plug can be fully inserted and against attempting to defeat this safety feature.
• Indoor Use Only: As a portable lamp, it is intended for indoor use.
• Bulb Replacement: Users can replace the included 9-watt LED bulb with other compatible bulb types, adhering to the specified maximum wattages for incandescent (60W), CFL (13W), or LED (12W) bulbs.

Maintenance Features:

• Cleaning Instructions:
  • Lamps: Always unplug the lamp before cleaning.
  • Shades: Dust shades with a feather duster or an appropriate vacuum-brush attachment.
  • Lamp Bases: Wipe with a soft, dry cloth. Clean lamp bases using methods appropriate to their material.
  • Chemical Avoidance: Avoid using chemicals and household cleaners, as they may damage the finish of the lamp.
• Cord Damage: The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire must be destroyed to prevent safety hazards.
• Pre-Installation Inspection: Users are instructed to inspect the item carefully before attempting to install it. If there is any damage or obvious defect, the item should not be installed. Once installed, the item cannot be returned.
• Professional Installation Recommendation: The manufacturer recommends that the installation of this lighting fixture be done by a licensed electrician, particularly for the initial electrical connection to the main power supply.
• Power Disconnection Warning: Before installation, users are warned to switch off the main electrical supply from the main fuse box/circuit breaker to prevent electric shock.
• Assembly Surface: It is recommended to assemble the item on a soft surface to prevent scratching the finish during the process.

JONATHAN Y JYL5010A Specifications