we know what‘s cooking
29/69
Document 10000028013-DOC-000-00-EN
PowerMix
The PowerMix function enables a quick and easy switch to be made to a stirring pattern which mixes the
contents of the kettle. This can be used, for example, when thickening or adding other ingredients.
Press and hold down the key. After one second, the stirring pattern will switch to P.
When the key is released, the stirrer will switch back to the stirring pattern and RPM it had before the
key was pressed.The RPM of the PowerMix function is set in the user menu.
Inspection hatch
The inspection hatch is used to add ingredients to the kettle while the stirrer is rotating.
The cover for the inspection hatch is removed by grabbing the handle, push the inspection hatch free of
the small brackets and lift it away.
The cover for the inspection hatch is attached in reverse order.
3 Mash potatoes, mix sauces, etc. Stirring with directional changes.
4 revolutions clockwise, ½ revolu-
tion pause, 3 revolutions counter
clockwise, ½ revolution pause, etc.
30-55
a
4 Casserole dishes, etc. which require
careful stirring at regular intervals.
Stirring with directional changes.
3 revolutions clockwise, 50 revolu-
tions pause, 3 revolutions counter
clockwise, 50 revolutions pause,
etc.
80
5 Used when the effect of the scrap-
ers is not wanted.
Continuous stirring without scrapers
(counter clockwise).
-
6 Used to optimize the chilling pro-
cess
Stirring with directional changes.
20 revolutions clockwise, 0,5 revolu-
tions pause, 2 revolutions counter
clockwise, 0,5 revolutions pause
etc.
-
a. The maximum speed is limited to the range in which the stirrer has greatest power. This depends on the type and size of the
kettle.
To Next Page
Loading...
