EasyManua.ls Logo

Jonsered CC 2152C User Manual

Jonsered CC 2152C
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
English
CS 2152,
CC 2152C
CS 2152W
CS 2152WH
CS 2153, CS 2153C
CS 2153WH
CS 2153CWH
Operator
s manual
Please read the oper
ator’s manual carefully and make sure you understand the instructions before using the machine.
Question and Answer IconNeed help?

Do you have a question about the Jonsered CC 2152C and is the answer not in the manual?

Jonsered CC 2152C Specifications

General IconGeneral
Engine Type2-stroke
Displacement50.2 cm³
Power Output2.4 kW
Weight (excl. cutting equipment)4.9 kg
Chain Pitch3/8 inch
Fuel Tank Capacity0.5 liters

Summary

Key to Symbols

General Safety Precautions

Important Safety Information

Critical safety guidelines, warnings, and advice for safe operation.

Personal Protective Equipment (PPE)

Details mandatory protective gear required for chain saw operation.

Chain Brake and Front Hand Guard

Describes the function and operation of the chain brake and front guard.

Chain Brake Activation and Use

Explains how the chain brake is activated manually and automatically.

Cutting Equipment Safety Guidelines

Rules for choosing and maintaining cutting equipment for safety.

Kickback Reduction Strategies

Methods to reduce the risk of kickback through equipment and technique.

Chain Sharpening and Depth Gauge

Chain Maintenance and Lubrication

Chain Tensioning Instructions

Instructions on how to properly tension the saw chain to prevent accidents.

Cutting Equipment Lubrication

Importance of lubrication for cutting equipment and risks of poor lubrication.

Cutting Equipment Wear Checks

Fuel Handling

Fuel Mixture and Types

Information on mixing petrol and two-stroke oil, and recommended fuel types.

Refueling Safety Precautions

Crucial safety steps to prevent fires during refueling.

Starting and Stopping

Pre-Start Safety Checks

Essential safety checks before starting the chain saw.

Cold Engine Start Procedure

Detailed steps for starting the engine when it is cold.

Warm Engine Start Procedure

Steps for starting the engine when it is already warm.

Engine Stopping Procedure

How to safely stop the chain saw's engine using the stop switch.

Working Techniques

General Working Instructions

Fundamental safety rules and advice for using the chain saw effectively.

Basic Cutting Technique

Guidance on safe cutting, grip, and posture.

Tree Felling Technique Basics

Introduction to tree felling and safety distances.

Felling Direction and Area Prep

Planning the felling direction and preparing the work area.

Felling Cuts and Control

Explains the directional cuts and the felling cut for controlled tree fall.

Felling Cut Precision

Specifics on making the felling cut and the role of the felling hinge.

Cutting Tensioned Wood Safely

Techniques for safely cutting wood under tension to prevent splitting or recoil.

How to Avoid Kickback

Explains what kickback is, how it occurs, and its dangers.

Limbing Kickback Risks

Specific kickback hazards encountered during limbing operations.

Maintenance

Carburettor Adjustment

Instructions for adjusting the carburettor for optimal engine performance.

Safety Equipment Checks

Procedures for checking the chain brake, hand guards, and other safety components.

Inertia Brake Release Check

How to test the inertia-activated chain brake mechanism.

Brake Trigger and Throttle Lockout

Checking the manual brake trigger and throttle lockout function.

Maintenance Schedule

Technical Data

Related product manuals