To Next PageTo Next Page
Need help?Do you have a question about the Jonsered CS 2138 and is the answer not in the manual?
Engine Specifications| cylinder volume | 42 cm3 |
|---|---|
| stroke | 32 mm |
| idle speed | 3000 rpm |
| recommended max speed, unloaded | 13000 rpm |
| power | 1.8 kW |
Noise Levels| noise pressure level at operator’s ear | 101 dB(A) |
|---|---|
| noise power level | 95 dB(A) |
Vibration Levels| front handle vibration level | 5.5 m/s2 |
|---|---|
| rear handle vibration level | 8.5 m/s2 |
Fuel and Lubrication System| fuel capacity | 0.38 litre |
|---|---|
| oil pump capacity at 8500 rpm | 4 - 8 ml/min |
| oil capacity | 0.2 litre |
Chain/Bar Specifications| standard bar length | 14/36 in/cm |
|---|---|
| recommended bar lengths | 14/36 16/41 in/cm |
| usable cutting length | 13.5/35 15.5/40 in/cm |
Weight and Dimensions| weight without bar and chain | 4.7 kg |
|---|---|
| pitch | 0.375 inches |
| thickness of drive link | 1.27 mm |
Explains various safety and operational symbols used in the manual.
Key steps to take before operating the chainsaw to ensure safety.
Guidelines for safe operation of the chainsaw during use.
Recommendations for keeping the chainsaw in optimal condition.
Precautions for safe handling and storage of fuel.
Strategies and techniques to minimize the risk of kickback.
How to maintain proper grip and body positioning for control.
Explanation of the chain brake system and its role in safety.
Steps for attaching the bumper spike to the chainsaw.
Detailed procedure for mounting the guide bar and chain.
Preparations and checks to perform before starting the engine.
Importance and procedure for lubricating the bar and chain.
Correct procedure for fueling the chainsaw with the proper fuel mixture.
Step-by-step guide for starting a cold engine.
Steps for starting an engine that has recently been running.
How to handle situations where the engine is difficult to start.
General principles for safely felling trees.
Specific methods for felling trees with a diameter of 15 cm or larger.
Explains different cutting methods for bucking logs.
Techniques for cutting logs that are not supported.
Methods for removing branches from a felled tree.
A routine schedule for checking and maintaining the chainsaw.
Procedures for maintaining the guide bar for optimal performance.
Instructions for cleaning the air filter to maintain engine performance.
Steps for replacing the spark plug for easier starting and better running.
How to adjust the carburetor for optimal engine performance.
Recommendations for storing the chainsaw properly.
A guide to diagnosing and resolving common chainsaw problems.
