Need help?Do you have a question about the Jonsered CS 2139T and is the answer not in the manual?
Lists warning and operational symbols found on the chain saw itself.
Explains symbols used throughout the operator's manual for clarity and safety.
Essential checks and preparations before operating the chain saw for the first time.
Critical safety advice and guidelines for safe chain saw operation.
Details mandatory safety gear required for operating the chain saw.
Explains the built-in safety features of the machine and their importance.
Describes the function and operation of the chain brake and front hand guard.
Guidance on selecting and maintaining cutting equipment for optimal performance and safety.
Focuses on reducing kickback risk through appropriate cutting equipment selection and maintenance.
Explains the importance of guide bar characteristics in relation to kickback.
Provides instructions on proper chain sharpening and depth gauge adjustment for safety.
Step-by-step guide on how to properly tension the saw chain.
Explains the importance of proper lubrication for the chain and bar.
Guidelines for inspecting the chain, bar, and sprocket for wear and damage.
Step-by-step instructions for attaching the guide bar and saw chain to the saw.
Safety precautions and procedures for refuelling the chain saw.
Explains fundamental techniques for cutting wood with the chain saw.
Essential guidance and techniques to prevent dangerous kickback incidents.
Explains the phenomenon of kickback and its causes.
Procedures for checking and maintaining the machine's safety features.
Checks and verification of the throttle lockout mechanism's proper function.
Verifying that the stop switch correctly shuts off the engine.
General safety guidelines for users operating chain saws.
Specific safety measures to prevent and mitigate kickback incidents.
To Next Page
General