36 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
CS 2165 CS 2171/WH
Engine
Cylinder displacement, cm
3
65,1 70,7
Cylinder bore, mm 48 50
Stroke, mm 36 36
Idle speed, rpm 2700 2700
Power, kW/ rpm (Europe) 3,4/9000 3,9/9600
Power, kW/ rpm (Australia) 3,4/9000 3,9/9600
Ignition system
Manufacturer of ignition system SEM SEM
Type of ignition system CD CD
Spark plug NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Walbro HD12B/
Zama C3M-EL2C
Walbro HD6B/
HD12B
Fuel tank capacity, litre 0,77 0,77
Oil pump capacity at 8,500 rpm, ml/min 4–20 4–20
Oil tank capacity, litre 0,42 0,42
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 6,0 6,1
W: 6,3
Noise emissions (see note 1)
Sound power level, measured dB(A) 113 112
Sound power level, guaranteed L
WA
dB(A) 114 114
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
Europe: 102 102
Australia: 104 104
Vibration levels (see note 3)
Front handle, m/s
2
3,6 4,6
Rear handle, m/s
2
5,7 5,2
Chain/bar
Standard bar length, inch/cm 15”/38 15”/38
Recommended bar lengths, inch/cm 15-28”/38-70 15-28”/38-70
Usable cutting length, inch/cm 14-27"/35-69 14-27"/35-69
Chain speed at max. power, m/sec 20,1 21,4
Pitch, inch/mm 3/8" /9,52 3/8" /9,52
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7
To Next Page
Loading...
Need help?
General