Jonsered CS 2172 WH - Technical Data

38 – English
TECHNICAL DATA
1153687-49 Rev.2 2015-09-02
Technical data
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.
CS 2166 CS 2172 CS 2172WH
Motor
Cylinder displacement, cu.in/cm
3
4,31/70,7 4,31/70,7 4,31/70,7
Cylinder bore, inch/mm 1,97/50 1,97/50 1,97/50
Stroke, inch/mm 1,42/36 1,42/36 1,42/36
Idle speed, rpm 2700 2700 2700
Power, kW/hp @ rpm 3,6/4,9 @ 10200 4,1/5,6@10200 4,1/5,6@10200
Emissions Durability Period according to California Air
Resources Board, h.
300 300 300
Ignition system
Spark plug NGK BPMR 7A NGK BPMR 7A NGK BPMR 7A
Electrode gap, inch/mm 0.02/0,5 0.02/0,5 0.02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 1,63/0,77 1,63/0,77 1,63/0,77
Oil pump capacity at 9,000 rpm, ml/min 4-21 4-21 4-21
Oil tank capacity, US pint/litre 0,89/0,42 0,89/0,42 0,89/0,42
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg 14,1/6,4 14,1/6,4 14,6/6,6
Chain/bar
Standard bar length, inch/cm 20"/51 20"/51 20"/51
Recommended bar lengths, inch/cm 16-28”/41-71 16-28”/41-71 16-28”/41-71
Usable cutting length, inches/cm 15-27”/38-69 15-27”/38-69 15-27”/38-69
Pitch, inch/mm 3/8" /9,52 3/8" /9,52 3/8" /9,52
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5 0,058/1,5
Drive sprocket type/teeth Rim/7 Rim/7 Rim/7
Chain speed at max. power, m/sec 22,7 22,7 22,7