19
WORKING TECHNIQUES
Sweeping
S The fan effect of the rotating line can be
used for quick and easy clearing up.
Hold the trimmer line parallel to and
above the area to be swept and move
the tool to and fro.
S When cutting and sweeping you should
use full throttle to obtain the best results.
Cutting
S The trimmer is ideal for cutting grass that
is difficult to reach using a normal lawn
mower. Keep the trimmer line parallel to
the ground when cutting. Avoid pressing
the trimmer head against the ground as
this can ruin the lawn and damage the
tool.
S Do not allow the trimmer head to con--
stantly come into contact with the ground
during normal cutting. Constant contact
of this type can cause damage and wear
to the trimmer head.
W ARNING: Neither the operator
of the machine nor anyone else may
attempt to remove the cut material
while the engine is running or the
trimmer line is rotating, as this can
result in serious injury . Stop the
engine and trimmer head before you
remove material that has wound
around the drive shaft as otherwise
there is a risk of injury. The bevel
gear can get hot during use and may
remain so for a while afterwards. You
could get burned if you touch it.
W ARNING: Wa tch out for thrown
objects. Always wear eye protection.
Never lean ove r the cutting attach-
ment guard. Stones , rubbish, etc.
canbethrownupintotheeyes
causing blindness or serious inju ry .
Keep unauthorized persons at a dis-
tance. Children, animals, onlookers
and helpers should be kept outs ide
thesafetyzoneof15m.
Stopthemachineimmediatelyif
anyone approaches .
To Next Page
Loading...
Need help?
General
